70cc mods

[afranco]

my son has a viper 70 great quad might i add! the problem is hes getting better and the obvious he grows . what would be the best mods and tricks to make it grow with him.all suggestions would be deeply appreciated

[mxdad423]

well it all depends on what you want, if you looking for a little more power and speed you could pipe it and do some changing on the clutch springs and weights. There are alot of options you can get just about anything for the viper that you can get for the big quads everything from motor mods to suspension mods...

[afranco]

thanks mx .any suggestions . on pipes and clutches

[mxdad423]

Yea the trinity pipe is about the best one out there if you would like to get some prices contact Cory at Kool Kidz Atv he is very good to deal with tell him Kevin Smitley told you to call he will treat you right his number is (908)689-2696 any more questions let me know.....

[mxdad423]

Oh I forgot the clutches , you can get all that stuff from Cory I run the Malossii fly clutch with the koso bell red big spring and red little springs and 4.3 weights, now like I said my boy races his but believe me this thing flys the clutches aren't very cheap either the fly clutch is like 130.00, the bell is 90.00 now the springs are cheap both sets are around 40.00. like I said if you need anything else just let me know....

[QuadJunkies]

There is alot of souces out there -Hetricks ,WRHracing ect...
We recently have dealt with http://www.extrememiniquadsnw.com/

AWESOME service!!
Its nice having someone closer to this side of the US. :)

[afranco]

ill give him a call . i live in colorado .i think next year ill let him race . parts sure are pricey . if i need any advice mind if i hit you guys up? thanks for the help

[QuadJunkies]

Originally posted by afranco
ill give him a call . i live in colorado .i think next year ill let him race . parts sure are pricey . if i need any advice mind if i hit you guys up? thanks for the help
sure... Anytime ;) Ask for Mike

[afranco]

great video my son loved it. and the quads are really nice . my daughter 12 loved it to . ill try the trinity pipe and the clutch.what do you thunk of milling the head someone mentioned that to me .also reeds and filter? you guys are more helpful then the motorsport shop i baught from.

[etondaddy]

Yes milling the head will give you more compression. But every thing works together. Like Kevin said call Cory at Kool Kids Atv and tell him Mike Kozura said to call He's cool as h@ll. And ask him where my shirts at. LOL LOL :confused: :confused:
Yea buddy you start racing just give Cory your credit card number LOL LOL

Check out Kyle's web page
http://home.comcast.net/~dale08/wsb/html/view.cgi-home.html-.html

This is my little buddy, thats Kevin in the yellow shirt
http://home.comcast.net/~dale08/wsb/media/306643/site1209.jpg

[QuadJunkies]

Originally posted by afranco
great video my son loved it. and the quads are really nice . my daughter 12 loved it to . ill try the trinity pipe and the clutch.what do you thunk of milling the head someone mentioned that to me .also reeds and filter? you guys are more helpful then the motorsport shop i baught from. Glad they liked it!:)
We too have the Trinity pipe-GREAT PIPE!

[mxdad423]

heres a pic of my son Brandon on his E-ton and Etondaddy's son Kyle on his, Kyle is the one in the front #5 and Brandon and the 2nd in line #423. Thats etondaddy in the orange shirt in the back to the left...

[etondaddy]

Yea what you do for your kids, you can't see it real good but in my right hand is a Garfield water bottle he got that week at Kennywood park. I looked real cool caring that around. Hey you know what thats the race his arm was fractured from the week before and we didn't know it.:eek:

[etondaddy]

OK I found a pic of both of us. I meen all four of us.

http://i58.photobucket.com/albums/g278/etondaddy/ResizeofwebDSC09069.jpg

[markvette]

on the eton most pipes will not fit unless you take the stock foot boards off and add ac nerfs. as far as i know wrh racing is the only one to build a pipe for the eton that will work with the stock floor boards. he can aslo hook you up with anything you need for the eton.

Mark

[markvette]

here is a pic of my sons viper

110cc stroker motor
wrh pipe
clutch and variater mods
28mm carb with k&n
ported cylinder
cut stock stator
plus 2 a-arms
works long travel front shocks
plus 3 swing arm
works fully adjustable 13" rear shock
plus 8 rear axle
aftermarket bumper and handlebarac nerfs
fully gusset frame
19x6x10 front holeshots on douglas rms
16x6.5x8 razr rears on itp rims
hpd chain tensioner
more but cant remember it all right now


http://216.77.188.54/coDataImages/p/Groups/205/205961/pages/853521/1000875.jpg

[etondaddy]

Sweet... nice looking quad Kyle likes the blue, it looks like next years is going to be blue for now... Looking for a 90 motor 1st.

[afranco]

nice one!!!! my sons is blue how do you post pics here ive tried but not to computer friendly.im gonna order pipe this month then ill see what hapens after

[markvette]

well you have to host them someplace first like imagestation. they need to be downsized to about 500x350 pixels. once you have hosted the pick firht click on it. at the bottom it will say properties. click on that, where it says location, copy the location. come here and click reply, click on image, paste the picture location in the box that pops up and that should post your pic.

Mark

[markvette]

http://i114.photobucket.com/albums/n246/quaddad1958/bubba.jpg

[etondaddy]

The way I do it is I upload my pics to photobucket.com (the pic has to have a address on the web) you have to but the address between the image brackets [img /img](I had to leave the inside brackets off). With photobucket all you have to do is cut and paste it from the third one under the pic , if you use it you'll see what I meen. It has the brackets and all with it. Thats the way I do It. Hope that helps a little.... If you what PM me and maybe I can help you more. Well I also resize them to 560 x 420 so they'll fit the screen better I use a program on my computer called ac/dsee viewer for that.

[QuadJunkies]

We went a lttle dif. this time around and done the Bumble Bee look :D

http://www.exriders.com/vbb/showthread.php?s=&threadid=252235

We done a small makeover one it this summer,a blind ole man ran my Sons mini over in the pits with his Rig :grr: and done some damage,his insurance picked up the bill. Im just glad my son wasnt on it when he ran it over :(

[etondaddy]

We really like the seat, but the hole quad looks great. ;)

Not sure what color combo we're going with for next year.:confused:

The powder coat oven is working fine did some blaster parts today. Thay were used with some pits but came out great, first time I did a flat color didn't know what to expect. (Columbia Coatings Matt Black)

http://i58.photobucket.com/albums/g278/etondaddy/ResizeofPicture001-3.jpg

http://i58.photobucket.com/albums/g278/etondaddy/ResizeofPicture005-1.jpg

[mxdad423]

Powdercoating looking good Mike just as soon as I get done with hunting season I will start coming down to give you a hand with customer stuff then we can start on the boy's 90's, Look out I see some more late nights in the basement with the Kevinator LOL, at least this time we won't turn your whole house red LOL. Hey remember the first creation.....?????

[etondaddy]

Yea we've came a long way from that first side cover.....

http://i58.photobucket.com/albums/g278/etondaddy/ResizeofPicture035.jpg

http://i58.photobucket.com/albums/g278/etondaddy/ResizeofPicture002.jpg

[markvette]

etondad
i want to get into powder coating. getting a gun from eastwood for christmas. gonna start small with our own stuff and parts i can do in a regular household oven. later will build an oven big enough to do frames. gonna use metal studs and sheet metal. a friend owns a sheet metal shop so that will help. gotta find someone to blast the parts for me, dont want to get into that end of it.

Mark

[QuadJunkies]

Were getting ready to PC my Daughters Blaster/Cr85 this week. Were having troubles finding the right color to match her graphics(rather dissapointed in the graphics and WAY overpriced)

I wish we had a place locally who sold powder :(

[etondaddy]

markvette
Check out http://www.caswellplating.com/ go to finishing forum. Man I learned alot from those guys. There's a lot of dudes that do it for a living on there. They have a section on oven building. I'll help you all I can. Go to Harbor Freight and get a laser thermometer for 40 bucks thats the key. You don't start your cure cycle timer until the part reaches the cure temp not the oven temp.

quadjunkies
have you tried
http://www.caswellplating.com/
http://www.columbiacoatings.com/index.htm
http://www.pendrypowdercoatings.com/html/
http://www.eastwoodco.com/

Talk to you guys next week, I have to leave for Kentucky for work for a week.

They're not hard to make check out http://www.powdercoatoven.4t.com/Index.html
http://i58.photobucket.com/albums/g278/etondaddy/ResizeofPicture010.jpg

[QuadJunkies]

I have with Columbia
Im dealing with one I found off Ebay right now.

[QuadJunkies]

What color of green is that?

[etondaddy]

Columbia Coatings, candy lime green translucent over silver metallic. BUT I did't like the way the first coat of green top coat came out so I blew a second coat on it so it's a little darker then my buddy wanted and you can't see the metallic as much. But it was a b**r job so he was happy.

Sorry it took so long like I said I was in Ky. this week.

[QuadJunkies]

thats ok ;) Im jsut having a REALLY tough time finding the right green.Else they are too dark or too bright.

[afranco]

thanks guys!!!!http://www.imagestation.com/8442108/3954486436

[afranco]

http://www.imagestation.com/picture/sraid220/p3f616d6f8a5d5d6e78688a34e0e73c58/ebb4aca4.jpg

[afranco]

so what you think guys http://www.imagestation.com/picture/sraid220/p15892474f1fe617abbc93f8cdcac2694/ebb4ac3f.jpg

[QuadJunkies]

Did you do mods yet ?!!
Looks like someones having fun!

etondaddy~~
got some powder today-went with Physco Lime with Extreme Chrome base for the Hybrid were building :D

shooting it this wk end!

[etondaddy]

Afranco~~
Looks great man, the h@ll with the money they make it every day, when he or she comes off the track or trail and takes there goggles off and all you see is big eyes and a big smile it's all worth it. And after you have worked on it all week and Sunday he or she comes off the track and says just put gas in it, man thats a great feeling. Now all you have to do is grab a cold one and lite the grill.

Quadjunkies~~
Glad to see you buy from Caswell they are very good people. I learned everything I know from there finishing forum. Mike and Lance Caswell are on it all the time to help there customers. The guy that did the part in the pic is hvac36 on the site he's helped me a lot. Post some pics when the frames done Kyle's been thinking about some type of green also.

[afranco]

i here ya etondaddy!!! well as you know im new to this and i appreciate the support from you and quadjunkies . there isnt much competition this way but still they have fun. ive took the clutch out and the head off . i dont have enough money yet for the pipe but soon. should i change out the veriater i think thats what its called. other then that someone told me about getting a bigger carb what do you think . also altitude makes a big difference to . by the way nice powdercoating

[etondaddy]

Ya buddy the next thing I would do is the pipe. And then the carb,variator wieghts, and rear clutch springs. They will all work with the pipe to get the most power out of the machine. Everything works together on a two strock. I'm not sure who you're dealing with, there's a lot of guys out there but I deal with Cory at Kool kidz atv. If your stuck at 8 oclock at night just call and leave a message and if he's home he'll call you back, or his wilf will call and tell you he'll call you when he gets home.

http://www.koolkidzatv.com/ (http://)

[QuadJunkies]

Originally posted by etondaddy
Afranco~~
Looks great man, the h@ll with the money they make it every day, when he or she comes off the track or trail and takes there goggles off and all you see is big eyes and a big smile it's all worth it. And after you have worked on it all week and Sunday he or she comes off the track and says just put gas in it, man thats a great feeling. Now all you have to do is grab a cold one and lite the grill.

Quadjunkies~~
Glad to see you buy from Caswell they are very good people. I learned everything I know from there finishing forum. Mike and Lance Caswell are on it all the time to help there customers. The guy that did the part in the pic is hvac36 on the site he's helped me a lot. Post some pics when the frames done Kyle's been thinking about some type of green also.

the powder was a beeitch,but its done... :)

[QuadJunkies]

.

[QuadJunkies]

lighting wasnt so good so Ill get better ones w/o all the shadows soon

[etondaddy]

Looks great !!!!!!

We have'nt even started yet... hopefully this weekend??? now he just wants super mirror black with yellow faded in from the ends who knows that could change lol lol

I'll get some pics up as soon as we get going here

[afranco]

now thats talent . i havent talk to koolkids yet hopefully this week.we have races starting on the 7th im gonna try to make it its ice racing . but with this weather i dont know. may i ask what is powdercoating . it isnt the same as painting i assume. and why is it better

[etondaddy]

When you talk to Cory at Kool Kidz tell him Etondaddy sent you (Mike Kozura).

Powder coating is much better than paint for durability. It’s some tough stuff. I built an oven and started to do my own coating last winter.

http://www.caswellplating.com/powder/index.html

http://i58.photobucket.com/albums/g278/etondaddy/ResizeofPicture010.jpg