PDA

View Full Version : sparks x5


pimpin330ex
11-07-2006, 04:29 PM
hi people i was just wondering what power gains you get out of a sparks x 5 compared to a x6 or x 4 thanks
250exkid
11-07-2006, 05:21 PM
i dont believe they even make an X-5
400eXr1d3rZ
11-07-2006, 05:26 PM
There's no X-5.
oldskoolex400
11-07-2006, 05:38 PM
about 100 horsepower
250X_project
11-07-2006, 07:47 PM
Actually they do make an X-5, it's right between the 4 and 6. :rolleyes: The difference is in the size of you engine if you have a 330 you'll want the 4. Great power gain that weighs less than 7lbs. From there up to 375 you'll want the X-5 and the 6 above that. Hope I helped. ;)
250exkid
11-08-2006, 08:43 AM
really? :huh :huh iv only seen on the site was the X-4 X-6
250X_project
11-08-2006, 12:09 PM
lol yeah. I think they all look the same, but there must be a difference in the rate of flow. the 4 and 5 are the same price while the 6 is $25 more. $400,$425. As I said they are set up for your engine size. This is for the 250X/300EX. I don't really know a hole lot about your machine, they may not have an X-5....actually I'll go check...:D
250X_project
11-08-2006, 12:14 PM
they offer only the X-4 for the 250EX.
pimpin330ex
11-08-2006, 12:45 PM
o ya i forgot to say i have a 330 so im better off getting the x4?
250X_project
11-08-2006, 01:07 PM
Yea the X-4 would be your best choice unless you were going to go bigger.
250exkid
11-08-2006, 01:30 PM
the X-4 SOUNDS AWSOME you will not regret it!
pimpin330ex
11-08-2006, 05:59 PM
ok thanks for all your help
250X_project
11-08-2006, 06:32 PM
No prob. Glad to help!
11-08-2006, 08:02 PM
ok

X4 is for up to 330cc

X5 is for 345 – 375cc

x6 is for over 375cc


;)
250X_project
11-08-2006, 08:51 PM
Yeah, your a little late on that. lol
400eXr1d3rZ
11-09-2006, 04:58 PM
Originally posted by Kickstarts_Suck
ok

X4 is for up to 330cc

X5 is for 345 – 375cc

x6 is for over 375cc


;)

Also the X-6 is ideal for heavily modded motors.

X-4 works best with stock motors.
bwamos
11-10-2006, 07:55 AM
Originally posted by 400eXr1d3rZ
Also the X-6 is ideal for heavily modded motors.

X-4 works best with stock motors.

Depends on the ATV. On the 300ex.. the x-4 is actually a little large for the stock motor. It's best suited for the standard bores w/ port work and agressive cams.

X-4 is perfect for a 330cc 300ex.