PDA

View Full Version : tie rods



nolejoel
11-03-2006, 04:54 PM
I purchase the front end wideing kit off ebay but I ran into a problem when connecting up the steering.

I believe the kit says to use 300ex tie rods, however when I when to install them they were way too short on both side.

the distance from end to end is now around 16" so I am trying to find a correct replacement set to get this project finished, any help would be great.

Dodge 1 Ton
11-17-2006, 08:12 AM
We had to make ours. If you know how long you want them Robbs be able to get them for you. He sells a widing kit also.

Spider 171
11-17-2006, 09:47 AM
I purchased aluminum tap tubing to 3/8 and two taps standard and reverse thread, 4 ft. tubing and heims 3/8 for our E-ton and made some for my buddies Quadracer as well. Coleman Racing. They sell race car parts. I Believe it was less than $40.00? It was last year. But they worked perfect. May need to ream for the new bolts, can't remember? Cheap fix.

Also Robbsracing is great, everthing HONDA he is the gooroo.LOL

Good Luck

911
11-18-2006, 09:07 PM
you need 400ex rods they fit