elka rear linkage

[h450rider]

Hello anyone knows if I can use the stock swingarm skid plate with the elka linkage???????
Thanks

[JW450R1]

if u get a dual linkage the stock or even after markt will not work.u will have to modify it to work.

[DirtDevilBT]

This info vvv is for an aftermarket Armidilo skid plate.

If you are asking about the dual elka linkage then you will have to modify your skid plate. I did a write up over at www.TRX450R.org in the suspension forum, look for my name.

If you are talking the single elka link that uses the 15" shock, then you will need to space the skid plate a little. Take 6 washers and put them between the skid plate and swingarm where the bolts go. This will give you enough, depending on skid plate manufacturer you might need thicker ones, or two for each bolt.