29FTEX
11-02-2006, 11:06 AM
Updated with what's left, and added a couple of things.
Time for another garage clean out.
There are new and used parts in the mix. I wouldn't sell it if they weren't usable. Make offers on one thing or everything. :D
TRX450R new parts:
Brand new 2006 front hubs. Never used.
Brand new Thermostat w/ O-ring (NIP)
Brand new Temp sensor (NIP)
Used parts:
Kick start lever. It works, but the pivot needs cleaned to move a little better. SOLD
Gas tank w/ cap. It's scratched up, but does hold fuel without leaking.
Petcock valve (fuel selector). Works as it should.
Steering stem bushing w/ holder.
Throttle cable
Gas cap
Foot guard frames (both sides, not bent)
Rear linkage. No bearing.
Overflow bottle. No leaks.
Rectifier. Tested and works.
Wire harness. The wire to the temp sensor was cut when I got it. I crimped a wire and blade connector to it. It all has been tested, and works as it should. It was actually tested on the quad.
Coil w/ sparl plug cap. This is odd. The spark plug tube seems a little longer than it should. May have come from a CRF450R. I did test it on the quad, and it works great.
Rear brake pedal. Not bent.
Plastic radiator grill (all 3 pieces).
Front brake light switch (works).
It also have many vaious bolts/nuts/washers. Let me know what you need, and I may have it. Some are new in the package, so a part # may be helpful.
400EX clutch side gasket. New in the package.
http://img.photobucket.com/albums/v616/29FTEX/parts2.jpg
Time for another garage clean out.
There are new and used parts in the mix. I wouldn't sell it if they weren't usable. Make offers on one thing or everything. :D
TRX450R new parts:
Brand new 2006 front hubs. Never used.
Brand new Thermostat w/ O-ring (NIP)
Brand new Temp sensor (NIP)
Used parts:
Kick start lever. It works, but the pivot needs cleaned to move a little better. SOLD
Gas tank w/ cap. It's scratched up, but does hold fuel without leaking.
Petcock valve (fuel selector). Works as it should.
Steering stem bushing w/ holder.
Throttle cable
Gas cap
Foot guard frames (both sides, not bent)
Rear linkage. No bearing.
Overflow bottle. No leaks.
Rectifier. Tested and works.
Wire harness. The wire to the temp sensor was cut when I got it. I crimped a wire and blade connector to it. It all has been tested, and works as it should. It was actually tested on the quad.
Coil w/ sparl plug cap. This is odd. The spark plug tube seems a little longer than it should. May have come from a CRF450R. I did test it on the quad, and it works great.
Rear brake pedal. Not bent.
Plastic radiator grill (all 3 pieces).
Front brake light switch (works).
It also have many vaious bolts/nuts/washers. Let me know what you need, and I may have it. Some are new in the package, so a part # may be helpful.
400EX clutch side gasket. New in the package.
http://img.photobucket.com/albums/v616/29FTEX/parts2.jpg