PDA

View Full Version : valve procedure


sprtrx300ex
09-09-2002, 05:31 PM
Do I have to take off the gas tank, fuel line etc in order to adjust the valves? Or can I adjust them without taking anything off?

THANKS
Sick0
09-09-2002, 05:33 PM
Yup you have to take off the tank and every thing in the way of the top of the motor.
MeatHead
09-09-2002, 05:47 PM
Yep, that tank is coming off if you want to adjust those valves. You will need a really smalle wrench to adjust them. Instead of spending the money on the "proper" tool to adjust the valves on the 300, I found that a deck screw that takes the square drive bit will fit perfect onto the adjuster, just put the screw into a pair of vise grips and use a wrench to loosen/tighted the lock nut. It should be a breeze.