Blaster / Trade for a 4stroke ?

[blueyeace1]

Blaster / Trade for a 4stroke ?
Blaster with a 2001 complete rebuilt top to bottom ,bored .60 over fmf full exhaust,dyno jet stage 2,oil inject pump block off,rear hydro dull pads brake setup...very nice works great,new axel bearings and seals,new A/Arm bushings ,swing arm seals and bushings,gel grips,rear wheel spacers,new chain and sprockets 14 tooth on front,new clutch,jaws front pusbar i also have many extra parts that all goes along,another motor apart plus oods and ends parts..all good thsi blaster runs very well and fast for a 200cc starts rightup and has no problems not sure year of the frame i think its a 89 or 90 but i put a 2001 motor on it but had it rebuilt everything was replaced,all bearings and seals and gaskets,rear tires are shredders about 80% tread left rims are purple and in good shape...Looking to trade it off on a 4 stroke..let me know what you got and send me pics to my email and i can send you pics of my blaster and also i have a 2002 Raptor 660 for trade
BlueyeAce1@yahoo.com

[klay_911]

how much are u looking for it?

[blueyeace1]

What you got to offer?

[blueyeace1]

pic1

[blueyeace1]

pic2

[blueyeace1]

Any1 got a 4stroke to trade me...this blaster is fast and runs great..

I DO I DO! haha let me know when you wanna come over here man thanks

[blueyeace1]

any1... trade for any 4stroke that runs?

[blueyeace1]

BUMP!!

[Jon114xxx]

I got a 1989 Yamaha Moto-4 that actually runs good... I just putt around on it and i rele need to get rid of it cause i have 2 blasters and a CR-85 so i dont rele need it... let me know what you think...

[blueyeace1]

plz send me some pics and anything done to your Quad..ty
BlueyeAce1@yahoo.com
Bump!!!

[Jon114xxx]

Before i take pics... do u want a race quad because its not.... its not a utility either but its deffinitely not race. Its in pretty good condition. I will take pics tomorrow and if you want it, i can probably make a deal to trade and pay some cash... idk we can make a deal if you want it


Thanks,
Jon

[blueyeace1]

Yes plz send me pics to my email or post them here...no not looking for a race quad,looking for a 4 stroke for my youngest son to ride..nothing special but dont want junk or anything thats going take alot work. Whats your location also ? State and closest town ?
tyvm.....Butch

[lilhickboy]

[i have a 2000 yamaha blaster with a dg procircuit pipe new reeds clutch cable new brake cable in the front all it needs is some back brake work it comes with a extra front bumper gas tank and two front fenders i was asking $1,200 obo

[lilhickboy]

[QUOTE]Originally posted by lilhickboy
[B][i have a 2000 yamaha blaster with a dg procircuit pipe new reeds clutch cable new brake cable in the front all it needs is some back brake work it comes with a extra front bumper gas tank and two front fenders i was asking $1,200 obo or i was also looking to trade for a dirt bike or a truck

[blueyeace1]

sry Lilhickboy...im trying to trade my Blaster off for a 4 stroke i dont want another Blaster..if your trying to post yours try starting a new thread!
TTT
Bump!!!

[Jon114xxx]

I also have a 1997 yamaha RT 100 that i would like to get rid of... It runs pretty good and has recently had a toon up soo let me know if you want it... Thanks

[blueyeace1]

Jon114xxx
im still waitng on the pics from the Moto-4 and you can also send me pics of the 100 to my email..ty
BlueyeAce1@yahoo.com
Bump!!!

[Jon114xxx]

i sent an email to you of the pics of the quad and dirtbike...

[blueyeace1]

I got your pics Jon tyvm..ill let you know asap !

you still interested in my ttr? my ttr and $200...
let me know
thanks
Mike

[deo291]

i have a 1986 moto-4 80cc. Its pretty much stock, it has a uni filter and was rejetted. The plastics are black, and race cut to a nice shape. Its in great shape, starts right up and runs strong. If you're interested you can email at d.pasqua@gmail.com for pics.

[blueyeace1]

Blaster with a 2001 complete rebuilt top to bottom ,bored .60 over fmf full exhaust,dyno jet stage 2,oil inject pump block off,rear hydro dull pads brake setup...very nice works great,new axel bearings and seals,new A/Arm bushings ,swing arm seals and bushings,gel grips,rear wheel spacers,new chain and sprockets 14 tooth on front,new clutch,jaws front pusbar i also have many extra parts that all goes along,another motor apart plus oods and ends parts..all good thsi blaster runs very well and fast for a 200cc starts rightup and has no problems not sure year of the frame i think its a 89 or 90 but i put a 2001 motor on it but had it rebuilt everything was replaced,all bearings and seals and gaskets,rear tires are shredders about 80% tread left rims are purple and in good shape...Looking to trade it off on a 4 stroke..let me know what you got and send me pics to my email and i can send you pics of my blaster and also i have a 2002 Raptor 660 for trade
BlueyeAce1@yahoo.com

[blueyeace1]

ty for the offer Deo291..but way to small !

[deo291]

it was worth a try :)

Looks good, im sure someone will trade for it.

[blueyeace1]

BUMP!!!

[blueyeace1]

B
U
M
P

[Jon114xxx]

Im sorry man.... my atv doesnt run anymore but if u ever deside to part out, I would like to buy alot of parts off of it.... Thanks, Jon

[blueyeace1]

sry to hear that Jon...gl bud.
BUMP!

still interested?

[z400guy21]

tell me the lowest yoiu will go im very interested

[blueyeace1]

Make me a offer cash or trade ?
BUMP!

[blueyeace1]

B
U
M
P
!

[blueyeace1]

ttt