QuadJunkies
10-31-2006, 01:21 PM
We have an axle and are not sure whos axle it is?:confused:
It fits the E-ton bearing Carrier,the rotor hub is the right spline and fits.... BUT.. the sprocket hub is a different spline.
the E-ton vipers sprocket hub is FLAT with a spacer behind it that goes into the seals.
the Kasea spocket hub fits the splines on the NEW axle,and has a built in spacer that goesnt intpo the seals,but allows about 1/2 inch of play in the axle-Hub is TOO NARROW/TOO THIN
The axle may have been off an Apex, but we have no real clue.
Heres some pictures. If not, Il talk ot Rich about it tomorrow.
It fits the E-ton bearing Carrier,the rotor hub is the right spline and fits.... BUT.. the sprocket hub is a different spline.
the E-ton vipers sprocket hub is FLAT with a spacer behind it that goes into the seals.
the Kasea spocket hub fits the splines on the NEW axle,and has a built in spacer that goesnt intpo the seals,but allows about 1/2 inch of play in the axle-Hub is TOO NARROW/TOO THIN
The axle may have been off an Apex, but we have no real clue.
Heres some pictures. If not, Il talk ot Rich about it tomorrow.