PDA

View Full Version : Cams


goldrims04
10-30-2006, 03:12 PM
has anyone found or put cams in the ltr and if so what stage ,brand and how was the performace thanks
Colby@C&DRacing
10-30-2006, 03:36 PM
We are currently working on a 542 stroker with nitrous. I am going to use the WEB tt grind cam for this ltr. I will has performance results soon and will share them with eveyone:)
oldskoolex400
10-30-2006, 05:38 PM
a member on this site ran a yoshimura RMZ450 exhaust cam only in his ltr450
Colby@C&DRacing
10-31-2006, 08:20 AM
The aftermarket cam specs are the same from the atv to the rmz dirt bike but the cam sprockets are way differnt so you can't just swap the cams.
oldskoolex400
10-31-2006, 08:53 AM
im not sure exactly how he did it but with some work it can be done he said it really helped out alot
Colby@C&DRacing
10-31-2006, 08:55 AM
Yes it can be done you just need to remove the cam sprockets and swap them over without changing the timing:)
oldskoolex400
10-31-2006, 09:02 AM
is it the intake or exhaust cam you can use? or can you run both?
goldrims04
10-31-2006, 05:16 PM
Originally posted by goldrims04
has anyone found or put cams in the ltr and if so what stage ,brand and how was the performace thanks thanks,good luck on the build
jfarrar30
10-31-2006, 06:31 PM
im running the yosh super motard rmx intake cam in mine.13.75/1 piston and porting and it is fast as he!!.has a TON of power everywhere.i recomend high compression with that agrressive of a cam though
oldskoolex400
10-31-2006, 06:39 PM
jfarrar30 did you sell that exhaust cam on ebay awhile back? i might have the wrong guy tho........
jfarrar30
11-01-2006, 05:57 AM
no still have it