swing arm skidplater

[99_400EX]

my stock swingarm skidplate is really beat up and i dont really know what all is out there that is good please give me some sugestions of skidplates something strong that doesnt cost muchi could also reenforce it at my work weld on some more material

thanks

jeremy

[Stevo]

PRM are good. I've had mine for about 2 yrs with no problems at all. I had dg on before and the belly skid rattled and the swingarm skid got really beat up and the welds cracked.

[SGA]

PRM. have the rear and belly skid. Well built and strong!

[Leo]

Just got an Armadillo skidplate for the swingarm, BOY that thing is nice, and also very tough (.250 inches thick)!

I pounded it over some serious rocks (40 miles worth of goat paths!) Saturday and it hasn't so much as bent a bit... I'm very impressed..

If I had any complaints it would be that the plastic guard for the chain is pretty thin..

Leo

[cdalejef]

I'm running PRM from front to back, they are the best skid I have ever run.

[Leo]

here's a pic of the armadillo..

Leo

[Leo]

here's another...

[99_400EX]

where is a good place to get the PRM and how much

[Castor-426ex]

Leo!! clean your quad:eek: :eek: :eek: :D

[gojk]

Just about any aftermarket is good except the DG. I have one and I would trade it ina heartbeat. Took one trip and the thing has a gash in it and it bent to H#LL. From what I have seen I would go with PRM. THey seem to be the one of the best.

[Lil90man!!]

PRM!!! would look up the number for ya but leaving for school:p sure someone will write it down 4 ya! i called them direct