PDA

View Full Version : AC Racing Pro-pegs


Sjorge450R
10-25-2006, 04:34 AM
I just ordered the blackline series nerfs and I just read about some issues that they seem to be having. People are saying that the bolts come loose? Has that happened to anyone here?
DJJ450r
10-25-2006, 05:13 AM
One of the 2 allen head bolts came loose on me one race but thats it, its was my fault for not checking it:blah:
Sjorge450R
10-25-2006, 06:39 AM
Originally posted by DJJ450r
One of the 2 allen head bolts came loose on me one race but thats it, its was my fault for not checking it:blah:

alright so you dont have regular problems withthem? Some people do nothing but complain about them.
GEARSMOKER
10-25-2006, 07:09 AM
had mine for a season,every time i check them they are fine.no complaints as of yet.
ShiftFMX
10-25-2006, 08:05 AM
The only problem I have with the pro-pegs is that they have a little bit of up and down movement to them. But I fexed that by shooting a few self tapping screw straight down thru the peg
tar
10-25-2006, 03:04 PM
Originally posted by ShiftFMX
The only problem I have with the pro-pegs is that they have a little bit of up and down movement to them. But I fexed that by shooting a few self tapping screw straight down thru the peg

The nerfs come with 2 extra nuts and bolts about 2-3 inches long and your supposed to drill a hole down through the nerfs/pegs and bolt them in.
bluebaron
10-25-2006, 05:52 PM
Originally posted by tar
The nerfs come with 2 extra nuts and bolts about 2-3 inches long and your supposed to drill a hole down through the nerfs/pegs and bolt them in.


wow that makes a lot of sense! i always wondered what those were for.
450rboy
10-26-2006, 07:46 PM
my bolts did come loss on me a couple times or so. so no big deal. i got different bolts and with washers, lock washers, and a lock nut. i have not had a problem with them sence then and its been over a year now
eganracing
10-26-2006, 07:59 PM
well i bent my AC's all up. the bolts never came loose i just bent the hell out of them.
450r517
10-27-2006, 11:35 AM
I put 2 bolts down through my pegs to help hold them tight. I also put some silicone where they fit together in front to keep water out, and vibration down.
Sjorge450R
10-27-2006, 11:48 AM
Originally posted by 450r517
I put 2 bolts down through my pegs to help hold them tight. I also put some silicone where they fit together in front to keep water out, and vibration down.

i will make sure that i use some silcone.... Im awaiting UPS right now. They usally come at 230 everyday.