PDA

View Full Version : 250X/300EX parts FOR SALE,exhaust, head, jet kit, RACK


250X_project
10-23-2006, 07:14 AM
ALL years 250X/300EX

stock cylinder head-new 3 angle valve job to the seats, valves re-faced, then the two lapped together. Also new valve oil seals-$65

NEW-DYNO-JET kit- jets still in packaging, along with instruction on stage 1 or 2 and which you would need, trouble shooting guide, and needle-$45

COBRA exhaust-full system, new high temp black gloss paint, adds a nice sound-$65

Rear rack- made for these wheelers, not bent, easy to attach, little surface rust, but not bad-$35

BRAND NEW-DID silent cam chain, never opened-$60

stock pegs-not bent could use some paint if you want them to look real good-$25

stock muffler-pretty dinged up but not pierced-$20

ANY PICS YOU WANT!!!! dewbey6969@yahoo.com---Adam
250X_project
10-23-2006, 12:32 PM
make some offers people
250X_project
10-23-2006, 08:00 PM
BUMP
250X_project
10-24-2006, 06:53 AM
What am I doing wrong? Someone must want something here...MAKE AN OFFER PLEASE
250X_project
10-24-2006, 03:12 PM
bump
Lonestar_R
10-24-2006, 03:49 PM
does the head include all the valves and springs....can you get pics
250X_project
10-24-2006, 06:32 PM
All valves, springs and keepers!

Valves are as good as new. they are straight as can be and were ground down to original 45* angle. then the head itself got a Three angle treatment to bring the contact area directly to center to seal tightly to keep optimal compression. After this all 4 valves where lapped which mated the two surfaces together with one another to make completely sure of sealing & new valve seals were added. all with 0 HOURS!! AS GOOD AS NEW (just not as clean) lol

springs and keepers are OEM and seem to hold up well.

No broken fins, no cracks or welds, spark plug threads are good and so should all others (well deff check & let you know)

send me your email and I will gladly send you pics within the same day.

Thank you -Adam
250X_project
10-24-2006, 07:00 PM
pics are taken and yes all threads seem good
250X_project
10-25-2006, 11:24 AM
bump
markvette
10-25-2006, 07:59 PM
give you $75 for the head and pegs. do you take pay pal ?
250X_project
10-25-2006, 08:10 PM
Mark-sent you a PM
enduro400rider
10-26-2006, 07:37 AM
ill give you 50 shipped for the DG pipe
250X_project
10-26-2006, 07:50 AM
Do you mean the Cobra? my DG is not for sale right now.
250X_project
10-26-2006, 08:10 AM
HEAD and PEAGS are SOLD!!
everything else - still FOR SALE
250X_project
10-26-2006, 03:39 PM
pipe, jet kit, cam chain, rack and stock exhaust still for sale...if someone wanted a full stock I would sell that instead of cobra if wanted...2 diff stock mufflers- 1 a little rusted (will sand and high temp paint if wanted) and 1 dented up a bit-your choice

-Adam