front bolt in swingarm

is there a trick to gettin the front bolt that goes through the back of the case to hold the swingarm on out?

[FullBore52]

beat it.....lol

[440exnacsracer]

mine was bent. hit it with a sledge hammer and still wouldnt come out. had to cut mine out with a cutting torch. if your in the same hole, youll have to replace all the bearings and seals too.

[bluebaron]

torch it if it does not move by beating it

[ChadEXer]

The bushings on the bolt make it hard to get out,,,you can get an ice pick and put it to the end of the bolt and tap it out with a hammer!!!