Green95Hoe
10-18-2006, 09:32 AM
Finally finished my 460 stroker. I never had the jetting where I wanted it with the 426 so I want it right for this new engine. Just lookin for anyone else with a comparable setup that can get me in the ballpark.
460 Stroker
450R Carb
HMF Slip on, stock header
K&N with outerwear and no lid
Stage 3 Stroker Cam
Stock Head setup
Right now it idles perfectly when warm, but sputters a misfire here and there at lower RPM's when driving and sometimes stalls out. The sputter is almost like a misfire and often makes me think I need a new plug. Still on the break-in but the jetting is def off because I know it should run better than this
460 Stroker
450R Carb
HMF Slip on, stock header
K&N with outerwear and no lid
Stage 3 Stroker Cam
Stock Head setup
Right now it idles perfectly when warm, but sputters a misfire here and there at lower RPM's when driving and sometimes stalls out. The sputter is almost like a misfire and often makes me think I need a new plug. Still on the break-in but the jetting is def off because I know it should run better than this