PDA

View Full Version : hmm


billawright
10-17-2006, 10:57 AM
I'm trying to find a 16/37 combo for my 05 but I can't find anywhere on the net that has these sizes sprockets, do they not make them or are they that rare or something?:confused:
10-17-2006, 11:00 AM
Originally posted by billawright
I'm trying to find a 16/37 combo for my 05 but I can't find anywhere on the net that has these sizes sprockets, do they not make them or are they that rare or something?:confused:

Nacs rears for the 400ex go all the way down to 33T. Their fronts probably go up to 16 too. or you could save money and just go really low on the rear and keep the front stock..

www.nacsracing.com
billawright
10-17-2006, 02:21 PM
all I know is im wanting to add more top end to my quad and I was told that a 16/37 combo is the best way to go for the way I ride.
billawright
10-17-2006, 08:23 PM
anyone know of any other websites that might have a 16t front sprocket?
atvRiDa400ex
10-17-2006, 08:36 PM
rocky mountain atv.com

check under the drive section i am sure they have what you need
billawright
10-17-2006, 09:54 PM
Originally posted by atvRiDa400ex
rocky mountain atv.com

check under the drive section i am sure they have what you need I found the 37t sprocket I wanna do in the rear but they didn't have a 16t for the front :(
williat
10-18-2006, 01:11 PM
paste this part number into the blank for catalog part number on Rocky Mountain's home page and it should take you to a Renthal 16-tooth front.

R27952016
williat
10-18-2006, 01:19 PM
oops, didn't see that you have a 2005. Looks like the one I posted only fits through 2004.
billawright
10-18-2006, 02:32 PM
Originally posted by williat
oops, didn't see that you have a 2005. Looks like the one I posted only fits through 2004. Is there really that much difference between a 04 or 05 as far as sprockets go?
williat
10-18-2006, 03:16 PM
I believe the stock front sprocket from 1999 - 2004 was a 15T, and for 2005 they changed it to a 14T, so there may be some differences.
krt400ex
10-18-2006, 03:32 PM
Originally posted by billawright
Is there really that much difference between a 04 or 05 as far as sprockets go?


not the fit or the way they mount
troutman561
10-18-2006, 04:17 PM
The 04 and 05 sprokets are different in how they mount so beware when you buy a new one to make sure its not for an 04 if you have the 05...
billawright
10-18-2006, 04:33 PM
well ****, I guess no one makes a 16t for a 05 yet. This sucks haha or I must not be able to find it yet =/
northwest Texas
10-18-2006, 06:19 PM
You might check with the guys that make Sidewinder Chains and Sprockets. I've had them on a couple machines over the years and been very, very pleased. I'd bet they make a 16T if it will fit. You might give them a call. Link below.

Sidewinder (http://www.sidewindersprockets.com/toc.htm)