I think my valves are bent

[johnsls]

I adjusted my valves, ran it for about a minute just to listen,, hit the throttle a couple of times...
Then a day goes by and I'm reading on here and.....:ermm: :uhoh:

I totally forgot about Top Dead Center... so I went out and redid everything.... NO GOOD

Heres what someone else told me-
Start it up and listen. If the valves (stems) are bent, they would probably stick open therefore your engine wouldn't run.

Well the engine runs but I can't give it any gas,, she just dies out.

[c.mcd]

if your valves were bent which would 99% of the time make them stick open or closed your engine would not run....your problem sounds to me like it has nothing to do with valves. check your main jet.