PDA

View Full Version : 300 ex 350x conversion



fastleo
10-09-2006, 09:34 PM
i got a 300 ex frame with a 350 x motor bored out to a 380 she ripps it up. the frots suspension is +1+2 and the rear is all stock i had the wild idea that i could put the stock 350x swing arm and axle that is 2 in wider than the stock 300ex.im having trouble firuring it out . i had to machine two 3/8 spacers in the bottom swing arm mounts but the rear shock mont does not allow me to use it due to the size of the bolt i need the bushing in the top shock mount does not allow the bolt to fit. im almost done with this beast HELP also i have a 350x that needs a good home
fastleo16@yahoo.com :rolleyes:

2muchquad
10-10-2006, 10:52 AM
I had the 350x swinger on my 300ex for a while too.I ended up using the 350x shock.I used a few washers i think to space the swingarm for sprocket alignment.Where you at in ohio?

fastleo
10-10-2006, 08:25 PM
dover newphilladelphia area all with ideas can reach me at 1 330 827 0456