02 MX Honda 416ex part out! (Very Nice)

[CrazyWhiteBo]

The crank bearings have gone bad and I'm just tired of messing with it and plus I don't ride as much as I use to. Here are some of the main parts, but everything on it needs to go!

Race Ready: 2002 Honda 416ex
-JE Piston 87mm 10:8:1 good rings & cylinder clean with good studs - SOLD

- Valve Cover w/ rockers - SOLD

-Oil tank painted in Black Bedliner spray (Looks Nice) - SOLD

-Hotcams Stage 2 Cam w/ bearings - SOLD

-GT Thunder Rev Box - SOLD

-Complete cylinder head race ported by ATP racing engines. Had new valves, guides, seals etc. done at the same time as the build - SOLD

-New Heavy Duty Cam Chain - $35 shipped

-Hinson Clutch Basket - SOLD

-Bills full exhaust - SOLD

-Houser Extended A-Arms +1 w/tie rods and extra ball joint new in box - SOLD

-Elka Triple Rate Piggyback Suspension (Front) - SOLD

-Chrome +1 Burgard Steering Stem w/bar clamp for 1-1/8 bars- $125

-Denton Stabilizer (Adjustable/Rebuildable)- SOLD

-Moose Fat Bars (Look just like Pro Taper) with new spider grips - SOLD

-Pro Design Tether Kill switch - SOLD

-AC Bumper (painted in black bedliner) - SOLD

-AC Pro Peg Nerfbars (comes with everything to mount to frame) (painted in black bedliner) - SOLD

-Lonestar axle (has surface rust where chrome has come off) - SOLD

-Burgard Carrier (needs new bearings and seals, they are on ebay)- $make offer

-New Primary Gear Gold O-Ring Chain and front and rear sprockets 15t/38t - (One ride) - $60

-Slightly Used Kenda Klaw Mx's 20x6x10 (fronts) on t9 baja wheels 10x5's - $100

-Slightly Used Kenda Klaw Mx's 18x10.5x8 (rears) on burgard beadlocks - $230

-Black race cut plastics w/Quad Tech Carbon Fiber Hood Scoop (New Graphics & Seat cover) - $200 for everything including seat and tank cover.

-Wirtz clutch perch w/cable - $20

-Polished Front Brake Master cylinder w/lever - $100 shipped

-Key switch w/key - $15 shipped

-Thumb Throttle w/ polished cover and cable - SOLD

-Swingarm - $100

-Complete wiring - $70 shipped

-Carb w/ choke mod and 180 main jet - SOLD

-Rear shock (Stock with dual rate spring setup & valved for 170-180 rider) C&D Racing rebuilt it last year - $150

-Lots more just pm me!



Whatever you need, just ask! I still have to take most of the 4 wheeler apart so some parts might take a little while to get. I'll take pics of anything you need to see up close. Either PM me or send me an email at bradkennedy01@yahoo.com Also, I have paypal!

[CrazyWhiteBo]

:D

[jrlj]

pm

[AtvMxRider]

pm'd you

[FutureRacer]

Let me know how much you want for them plastics. Thanks, Kelley

[AtvMxRider]

pm'd you back

[FutureRacer]

PM sent back to ya.

[oldskoolex400]

plastics, burgard beadlocks, denton steering stabilzer

[CrazyWhiteBo]

Originally posted by oldskoolex400
plastics, burgard beadlocks, denton steering stabilzer

empty your mailbox.

[CrazyWhiteBo]

I updated some of th prices.

[CrazyWhiteBo]

Any little parts needed let me know and I'll get yall prices

[oldskoolex400]

cleaned i also need the tether kill switch and the moose bars are they oversize or 7/8

[CrazyWhiteBo]

I'll post pics as I take parts off...

[CrazyWhiteBo]

Stabilizer

[CrazyWhiteBo]

Cam w/ sprocket & bolts

[CrazyWhiteBo]

Valve Cover

[CrazyWhiteBo]

Inside of Valve cover

[CrazyWhiteBo]

Tether Kill switch & clutch perch

[CrazyWhiteBo]

Nerfs

[BlackTrx440ex]

any pics of the axle?

[TCracin440ex]

what kinda deal can you cut me on all 4 wheels and tires

[CrazyWhiteBo]

Originally posted by BlackTrx440ex
any pics of the axle?

i'll try to get pics of the axle as sone as I take it off the quad. It may be sold, not sure yet. By the way, you mailbox is full.

[CrazyWhiteBo]

Originally posted by TCracin440ex
what kinda deal can you cut me on all 4 wheels and tires

I'll be meeting a guy to pick up truck tires & rims in emporia, va hopefully next week. I'll meet you if your interested. How does $350 sound? Only 2 rides on the tires.

[CrazyWhiteBo]

Make sure yall have your mailboxes cleaned. Ive not being able to PM people back because of full mailboxes.

[LeGaCyGiAnT124]

475 for the elkas? what are they set up for also? compression and rebound adjustable?

[CrazyWhiteBo]

sent pm

[Hondaexboy]

hey
do you have any pics of the exhaust and what do you think of it,..how loud is it
also what weight are the shocks set up for,...aret they for +1 a-arms?
thanks

[CrazyWhiteBo]

Originally posted by Hondaexboy
hey
do you have any pics of the exhaust and what do you think of it,..how loud is it
also what weight are the shocks set up for,...aret they for +1 a-arms?
thanks

pm sent

[BlackTrx440ex]

ok ill clean out my inbox if u wanna send it again tnx

[CrazyWhiteBo]

Elkas

[CrazyWhiteBo]

Bill's Full Exhaust

[moneypit]

how much for the front master cylinder?

[CrazyWhiteBo]

Originally posted by moneypit
how much for the front master cylinder?

$50 shipped

[FutureRacer]

Pics and measurement of axle like we discussed to kelley_corn@hotmail.com Thanks, Kelley

[CrazyWhiteBo]

Originally posted by FutureRacer
Pics and measurement of axle like we discussed to kelley_corn@hotmail.com Thanks, Kelley

somebody locally wants axle. I'll let you know if it falls thru.

[CrazyWhiteBo]

Carb

[CrazyWhiteBo]

Thumb Throttle w/ polished cover and cable - $45 shipped
By the way, there's no blue on it, its just the pic.

[CrazyWhiteBo]

steering stem & sabilizer back up for grabs.

[FutureRacer]

what about axle?

[CrazyWhiteBo]

Originally posted by FutureRacer
what about axle?

pm sent

[johnsls]

I'm trying to keep up with whats sold and whats not.. LMK if you have....

Denton stabilizer
Nerfs
A-arms (can i use the 450R shocks with these?)

If you can give me a good deal on all 3 and also price them seperate. Not sure if I could afford them all.

tks
John (pm me if you want)

[CrazyWhiteBo]

Originally posted by johnsls
I'm trying to keep up with whats sold and whats not.. LMK if you have....

Denton stabilizer
Nerfs
A-arms (can i use the 450R shocks with these?)

If you can give me a good deal on all 3 and also price them seperate. Not sure if I could afford them all.

tks
John (pm me if you want)

pm sent!

[CrazyWhiteBo]

Updated list and added a few more things...Yall pm so I can get rid of this stuff before I put it on ebay.

[CrazyWhiteBo]

heres the rest of my pics...

[CrazyWhiteBo]

:D

[FutureRacer]

How much for complete rear brake system along with the front brake master cylinder. Maybe i could buy it with the axle and you ship it all.
Thanks, Kelley

[CrazyWhiteBo]

Originally posted by FutureRacer
How much for complete rear brake system along with the front brake master cylinder. Maybe i could buy it with the axle and you ship it all.
Thanks, Kelley

axle is sold and i'll pm you about the brakes

[CrazyWhiteBo]

:)

[CrazyWhiteBo]

:blah:

[CrazyWhiteBo]

:chinese:

[CrazyWhiteBo]

:eek:

[CrazyWhiteBo]

:devil:

[FutureRacer]

PM returned. Gotta go soon, respond ASAP! Thanks, Kelley

[CrazyWhiteBo]

bump...list updated

[CrazyWhiteBo]

ttt

[CrazyWhiteBo]

I've started listing things on ebay. I'll list more day by day. Go here to bid. Thanks!

http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZcrazywhitebo

[Ncboost]

PM'ed

[CrazyWhiteBo]

Houser A-Arms, Cam & Cam Chain back up for sale. Buyer back out.

[yamahardr15]

I'll give you $60 shipped for the oil tank shipped to 63026

[CrazyWhiteBo]

Originally posted by yamahardr15
I'll give you $60 shipped for the oil tank shipped to 63026

sent pm.

[oldskoolex400]

hey have you received thru paypal yet for the items i bought?

[mtaylor3]

Still have the set of tires?

[CrazyWhiteBo]

Originally posted by mtaylor3
Still have the set of tires?

yes i still have all the tires & wheels

[CrazyWhiteBo]

Originally posted by oldskoolex400
hey have you received thru paypal yet for the items i bought?

never received a payment from you and your mailbox is full.

[oldskoolex400]

alright its clean PM me your paypal again and we'll try again

[mtaylor3]

How much for all four shipped?

[CrazyWhiteBo]

Originally posted by mtaylor3
How much for all four shipped?

I'm trying to figure out the cheapest way to ship them.

[BranMan]

r u sellin the air scoops?? if so shoot me a price.... thanks

[CrazyWhiteBo]

Originally posted by BranMan
r u sellin the air scoops?? if so shoot me a price.... thanks

air scoops have already sold.

[mtaylor3]

If you can figure out a price shipped to 66851. I would be very interested.

[fastyz85]

do you still have the ac bumper?

[CrazyWhiteBo]

Originally posted by fastyz85
do you still have the ac bumper?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=011&sspagename=STRK%3AMESE%3AIT&viewitem=&item=320038944504&rd=1,1

[fastyz85]

i really want it will you take 40 dollars shipped.pm me if we have a deal.

[fastyz85]

if you could get back to me by tonight i would appreciate it because i work tommorrow.thanks mike.

[stuntman_12]

I'LL TAKE THE CAM!!!!!!!!!!!!!!!!!!! since its already out... i need it ASAP!!!!!!
It's all i need to ride after waiting three months.. LONG STORY!!!


I also have a paypal account... Not sure how to use outside of ebay

My address is:
Cole Benefield
265 Deep Woods Dr.
Union Grove, AL 35175

How much for the oil tank again??? I really need that cam... get back to asap please... that's 70 bucks for the cam, gear, and bearings right???

[Ncboost]

Yes sell this guy the cam he really needs it

[johnsls]

LOL, yeah sell Stuntman_12 the cam... Please!!! LOL

Stuntman_12 glad to see your problem is going to be resolved.;) ;) ;)

[johnsls]

Originally posted by CrazyWhiteBo
Stabilizer

If you can do $60 shipped to NJ, 08807 I'll take it

[stuntman_12]

Yeah... maybe... i have nothin but bad luck.. i broke the stock cam trying to remove the decompressor!!!! And one of the vavle adjustment caps broke w/ me also!!!!GRRRRR... oh, well. A stage two will be a nice addition:D it's just back to waiting on parts.....:ermm: I can not wait to hear that thing fire... i've been watchin the CVBOYZ vids at work... it drives CRAZY that i can't ride right now...:mad:


I will still take the CAM!!!!! How long will it take to get here? Any clue? IT's all that i'm "patiently" waiting on... lol:D :D :D

[CrazyWhiteBo]

Originally posted by fastyz85
i really want it will you take 40 dollars shipped.pm me if we have a deal.

http://cgi.ebay.com/ebaymotors/AC-RACING-FRONT-BUMPER-CUSTOM-PAINTED-400EX-400-EX_W0QQitemZ320038944504QQihZ011QQcategoryZ43971QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem

[CrazyWhiteBo]

Originally posted by stuntman_12
I'LL TAKE THE CAM!!!!!!!!!!!!!!!!!!! since its already out... i need it ASAP!!!!!!
It's all i need to ride after waiting three months.. LONG STORY!!!


I also have a paypal account... Not sure how to use outside of ebay

My address is:
Cole Benefield
265 Deep Woods Dr.
Union Grove, AL 35175

How much for the oil tank again??? I really need that cam... get back to asap please... that's 70 bucks for the cam, gear, and bearings right???

$75 to paypal bradkennedy54@hotmail.com

[CrazyWhiteBo]

Originally posted by johnsls
If you can do $60 shipped to NJ, 08807 I'll take it

sorry not going that low with the stabilizer. Its well worth $80. It was $160 new.

[stuntman_12]

WOW... that was easy. almost too easy... Can you give me an expected arrival date, or departure date? You did recieve the payment didn't you?

[CrazyWhiteBo]

Originally posted by stuntman_12
How do i go about paying you via paypal... all i need is your e-mail address??? Thanks man... i really appreciate it!!!

i posted above about it....

$75 to paypal bradkennedy54@hotmail.com

[stuntman_12]

Good deal... that was easy. Get it? CAn i get an arrival date?:D

[CrazyWhiteBo]

Originally posted by stuntman_12
Good deal... that was easy. Get it? CAn i get an arrival date?:D

I'll sent it out Monday at Lunch priority mail. It should get there Wed. or Thursday. Thanks

[Jambob]

How much for the front tires and wheels shipped to 64118? Are the wheels dented or bent? Thanks.

[BranMan]

do u still have the exhaust?? if so will u sell just the slip on?? and how much for just that?? let me no plz

[johnsls]

Originally posted by CrazyWhiteBo
sorry not going that low with the stabilizer. Its well worth $80. It was $160 new.

OK but $80 shipped, LMK

[mtaylor3]

Still wanting to know how much shipped for all four tires/wheels to 66861? Would be very interested if you wanted to get rid of them?

[fastyz85]

well if i can't have your bumper do you still have the nerfs and whats the lowest you can go on them.

[CrazyWhiteBo]

Originally posted by BranMan
do u still have the exhaust?? if so will u sell just the slip on?? and how much for just that?? let me no plz

the exhaust is on ebay if you want to bid.

[CrazyWhiteBo]

Originally posted by fastyz85
well if i can't have your bumper do you still have the nerfs and whats the lowest you can go on them.

nerfs are on ebay, people have already bid on everything and I'll prolly keep it up there till it ends.

[Chin_Chilla]

Never got around to thanking you for the air scoops. Very good seller, shipped promply, and arrived just as described. Don't hesitate to purchase from him! Oh crazy, if you don't mind, PM me a list of "whats for sale".

[johnsls]

Originally posted by CrazyWhiteBo
sorry not going that low with the stabilizer. Its well worth $80. It was $160 new.


Originally posted by johnsls
OK but $80 shipped, LMK


Deal or No deal ?

[CrazyWhiteBo]

Originally posted by johnsls
Originally posted by CrazyWhiteBo
sorry not going that low with the stabilizer. Its well worth $80. It was $160 new.




Deal or No deal ?

$80 plus shipping. well worth it!

[CrazyWhiteBo]

I'll try to get a full list of everything thats left tonight or tomorrow. Some stuff is about to end of ebay...

http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZcrazywhitebo

[johnsls]

OK, How much to ship then? I'm in NJ, 08807

I just had a subframe delivered from Wisconsin for $9
so it can't be more than that.

[CrazyWhiteBo]

Originally posted by johnsls
OK, How much to ship then? I'm in NJ, 08807

I just had a subframe delivered from Wisconsin for $9
so it can't be more than that.

pm sent

[stuntman_12]

Just curious Crazywhitebo.... did get ya chance to send out that cam today? :confused: :D :D :D :D :D :D

[CrazyWhiteBo]

Originally posted by stuntman_12
Just curious Crazywhitebo.... did get ya chance to send out that cam today? :confused: :D :D :D :D :D :D

yep its on the way

[stuntman_12]

I won ur front bumper!!!! I think it'll good on my 416.... I'm goin w/ a black/ yellow schem... I really want those nerfs too...:D

[fastyz85]

just rub it in my face stuntman. thats okay i found some nice scoops off of rootar.

[CrazyWhiteBo]

*list has been updated*

Moose bars are on ebay for cheap right now and end today.

Also rear brake rotor w/hub is going cheap and end today.

Nerfs end on ebay today also.

Bid if your interested. Thanks

[stuntman_12]

Have you sent out the bumper? If not then wait n lets see if the Nerf bars come my direction too... well that still won't save me any money on shippin... will it? :ermm:

[CrazyWhiteBo]

Originally posted by stuntman_12
Have you sent out the bumper? If not then wait n lets see if the Nerf bars come my direction too... well that still won't save me any money on shippin... will it? :ermm:

front bumper and cam got sent out today and will be there thursday. I guess there will be another shipping charge if you when the nerfs.

[stuntman_12]

Oh well, it's all good... pay day is thurs!!!("broke College Student") That's really fast shipping if it'll all be here on Thurs. I hope it all is........ Can't wait to ride!!! Thanks man..:D

[01 400EXer]

CrazyWhiteBo,

Check your pm's.

[stuntman_12]

So it should def. be here Thurs? Did you shipped all of it Tues ? What service did you use? I just need it here asap... everyone is goin riden again This weekend... and maybe i wont be sittin at the house anymore!!! I lost the nerfs... dang... oh well, i couldn't have afford them any way... THURSDAY!!! Can not wait....:eek2: It's suppose to rain here though, guess i'll just be wet n cold, cuz nothins gonna stop me from riden as soon as she is together!

[CrazyWhiteBo]

Originally posted by stuntman_12
So it should def. be here Thurs? Did you shipped all of it Tues ? What service did you use? I just need it here asap... everyone is goin riden again This weekend... and maybe i wont be sittin at the house anymore!!! I lost the nerfs... dang... oh well, i couldn't have afford them any way... THURSDAY!!! Can not wait....:eek2: It's suppose to rain here though, guess i'll just be wet n cold, cuz nothins gonna stop me from riden as soon as she is together!

I emailed you a tracking #...Also the UPS lady said it should be there Thursday. lol

[stuntman_12]

Can you resend that info to me plz... i think that i accidently erased it or somethin...

[stuntman_12]

Could you send that info to steven.benefield@students.snead.edu


I can check that one anytime... i can't get to my work one as easily... I got home early today in hope of seein box.... not here yet.... i would just like to know where it is. Sorry to be so overbearing w/ this... but i'm goin crazy over here. Riden is my FAV thing to do... and i haven't rode in well over three months now...:( All my buddies are goin on a trip this weekend n i REALLY need to go.... just let me know anything you can... Thanks a TON!!!:D

[CrazyWhiteBo]

ive sent you the tracking number 2 times...its out for delivery right now. I just checked the tracking #. calm down it will be there today. lol

[CrazyWhiteBo]

Added a few items on ebay today...oil tank, complete rear brakes, oil lines, and subframe...

http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZcrazywhitebo

[nightmare311]

do u still have the Slightly Used Kenda Klaw Mx's 20x6x10 (fronts) on t9 baja wheels 10x5's if so what the lowest u'll take shipped to 30127?

[johnsls]

CrazyWhiteBo, I got my stabilizer in today.. No problems

thanks a lot!!:cool:

[stuntman_12]

IT all came in yesterday aroun 5:00!!! IT finally fired for the first time!!! Thanks on the quick delivery man!!!

It seems to be coming up to temp too fast though... i spit on the side of the motor (on the cooling fins) and it nearly instantly boiled off... this means that she is running too hot doesn't it?

I still have to play w/ the 450R carb.. i think that i'm lean...


THANKS!!! Hey guys BUY SOMETHIN FROM THIS CrazyWhiteBo!!!!!
:D :D :D

oh and the front bumper is awesome.. all of my buddies are jelous!!!

[CrazyWhiteBo]

yea your runnin way too lean. bump up to a bigger main jet or turn the pilot jet out some.

[CrazyWhiteBo]

bump...list updated

[DVickroy]

$60 shipped to 75071 for the front klaws- no rims

I need some tires

[CrazyWhiteBo]

Originally posted by DVickroy
$60 shipped to 75071 for the front klaws- no rims

I need some tires

thats like $15 a tire. Heck no

[polakmike7]

still got the a-arms n clutch basket?

[CrazyWhiteBo]

Originally posted by polakmike7
still got the a-arms n clutch basket?

Yes I still have both sale is pending on the arms.

[peacefrog]

Was just cerious if you have the stock thumb trottle still

[bansheemorphine]

stilll have the frame and nerfs? or the steering stem? if so let me know i am very interested

[CrazyWhiteBo]

Originally posted by peacefrog
Was just cerious if you have the stock thumb trottle still

already sold it.

[CrazyWhiteBo]

Originally posted by bansheemorphine
stilll have the frame and nerfs? or the steering stem? if so let me know i am very interested

i pmed you. i still have the steering stem.