Wiring diagram..PLEASE HELP

[exrider23]

Ok so ive been workin on my 400 for the last 4 months tryin to get it re-built...stripped all the way to the frame, frame PC...all the good stuff...anyways...i have everything together but i cant get a spark to the spark plug....I have a manual but theres a hole in the middle of the diagram where something leaked through it... So can someone plz give me a wireing diagram for the harness and electronics? thank you so much

[johnsls]

Heres one
http://www.servicehonda.com/hard%20parts/atv/trx400ex%2099-04/trx400ex%20frames%20page.htm

[johnsls]

or just goto

http://www.servicehonda.com/

[exrider23]

Thats not what i need. I need to know where the wires go. Like which color goes to which, which wire connects to which. I need a broke down version like the Clymers manual. thanks anyways...

[rummerd]

Dude, just go and get a manual, less than 20 bux usually. Please read this carefully. Most times your wires will only connect to wires that are the same color. Your connectors will only connect to the right ones, that is to say that they are all paired and no two connectors are the same. If you have gotton that far, you most likely have a bad ground. If you PC'd your frame, you will need to get down to bare metal to get a good ground, make sure all your grounds are good to go and get a manual. Good luck.

[exrider23]

well i have a manual, and there not 20 bucks...around here there are 40-45. I might not have a good ground...I will try that. But i would still appreciate if somone scanned the diagram out of the clymers book...mine has a hole

[exrider23]

ttt

[exrider23]

ttt...someone plz help me

[johnsls]

exrider23,, go here

http://www.exriders.com/vbb/showthread.php?s=&threadid=259348

[exrider23]

Thanks alot..thats what i needed