Pro-Design Kill switch on Tag Bars?

[Cannonball08]

Do You guys have any suggestions on were else or how to mount a Pro-Design Kill switch on a set of Tag T2 fat bars? One more question, could some one explain to me or post a picture on how to secure a 250R hood on a 400EX?

[Razorback]

i can't answer the kill switch question, but regarding the hood question...when i got my hood, it came with a set of 4 bolts, 2 for the front and 2 for the back (near the gas tank). you have to drill holes where you want them, then attach the bolts. now, i only used the bolts on the ones nearest the front. for the connection near the gas tank, i felt like the bolts were going to rub the gas tank, so i just drilled the holes and used zip ties. has held up great.

[RiPPiNiTuP7]

There is a guy on eBay that sells a mounting plate for a Pro Design Kill switch, you may want to look into that, their always being sold on there....

[Moto92]

What about the Nacs handlebar clamp that holds the PD kill switch, although Im not sure it it accepts a fat bar.

[Sick0]

I mounted my kill switch right next to the clutch lever. The handlebars are 7/8" at that point, which the kill switch will work.

[MEL]

i mounted my kill switch right beside the clutch perch on the down part. its a tight fit but it works. be careful not to strip the screws out on the kill switch mount.

[Cannonball08]

thanks for the info guys!