Break In Question

[330BigBoreR]

I followed the procedures in the sticky. But my Question is I broke my motor in with 32:1 oil mix it was castor 927 is it possible that it was too much oil and it didn't set the rings?? should i try 50:1 and see what happens

[330BigBoreR]

alright I found out that I have a 35mm PWK carb with
main 172
pilot 55
now i need to figure out where to start for tunning

[86 Quad R]

you really need to get to the bottom of why your compression is so low before ya get all into the tuning aspect of it.

[250r4life]

Originally posted by 86 Quad R
you really need to get to the bottom of why your compression is so low before ya get all into the tuning aspect of it.

exactly... and then after that you need a bigger carb for a 330

[330BigBoreR]

just ordered a new 38 mm from esr and I think my gauge was off because I messed with the throttle cable and it runs better now so we will see when I get the new carb.