PDA

View Full Version : electrical button



Black400
09-03-2002, 06:50 AM
i bot a cr lever and perch and put it on what do i do with the electrical button that was on the original stock clutch can i eleminate it:confused:

Taco
09-03-2002, 06:57 AM
yea just take the wires and hook em together. You 400 will now start without the clutch being pulled in.

Black400
09-03-2002, 07:13 AM
Originally posted by Tacostrk
yea just take the wires and hook em together. You 400 will now start without the clutch being pulled in.

:huh whitch wires the ones that hook it to the little box

Taco
09-03-2002, 07:14 AM
yup

Black400
09-03-2002, 07:16 AM
thanx:devil

Taco
09-03-2002, 07:17 AM
no prob. dont throw that switch away. If you ever want to add brakelights to your 400 the switch will bolt right up to your front brake lever.

09-03-2002, 11:25 AM
brake lights eh.... how do i do this

Texan32
09-03-2002, 12:07 PM
the switch will bolt directly on to your front brake master cylinder. Take a peek under and you'll see. All you gotta do is run a lead from your battery (or you could find a wire that is "hot" only when the key is on...this is what i did...don't remember which one right off hand) to one side of the switch. The other side (connector) you take back to your rear light. From there, you have to get a little creative. I just got a dual filiment socket from the auto store and connected the lead. don't forget though. you also have to splice in the exhisting running light.

edit....oh yeah, with the new socket and bulb...you'll have to ream out your light housing where the bulb plugs in...