Rear Spring??

[XCAdam89]

How much to PC my works 300 Rear Shock Spring in red?? Or another solid color.

[XCAdam89]

Here's a pic, in desperate need of some color!

[Pappy]

$24 shipped

[XCAdam89]

Is that if I disassemble it? I'm planning on getting it rebuilt soon, since it needs it, but I'm not completely sure on taking it apart, putting it back together....

I assume I should get it PC'ed before I get it rebuilt, correct? :devil:

[Pappy]

That price is for the spring only.

thats the only way im accepting them at this time, and you can have it rebuilt before its coated

[XCAdam89]

Will do. I'll send the disassembled spring sometime within the next few weeks...I'm still deciding on a color.

[XCAdam89]

Got a color close to the red on the left??

http://www.gtthunder.com/Extended_Travel.JPG

These are going to Laz within the next two days, and as you can see they need some color added.

Which would be easier for you, to send it to you like this, and have you take off the spring, powdercoat it, then send it to laz for a rebuild??

How much would it cost for that?

BTW, I cleaned up the shocks alot since this pic:

http://www.aircooledracers.com/invision/uploads/post-1-1160420856.gif

[Pappy]

send it to laz, have him send it here when its done. he can leave the spring off and i will reinstall it after coating

yes on the red

[XCAdam89]

Will do. You should be seeing it sometime soon. What all needs to be included with the shock? Just a return address?

[Pappy]

Yep

[XCAdam89]

Sending it out to Laz this weekend, so you should have it next week sometime. I'm pretty sure I'll pay you with paypal, but I'll let you know for sure..

I'm guessing the color I'm looking for is the same red as on Cody's Front Shocks:

[XCAdam89]

Shock is on it's way to Laz now, you should be seeing it soon.

[XCAdam89]

Update from Laz: He has it tore apart right now, but he is heading off to a race this weekend, so he won't get back to it until Mon. I'm guessing they will be at your hands mid-next week.

[XCAdam89]

Laz shipped it out to you today, you should be seeing it by Wed/Thurs.

Thanks Pap!

[XCAdam89]

Any Updates??

[Pappy]

Nothing new, but I should have it knocked out tomorrow.


Nothing like not being able to get off work to work:eek2: :huh

[XCAdam89]

I hear that!

Take your time, PM or post up a paypal address and I will pay you via that.. What will the total come to including the paypal fee and all shipped to me?

[Pappy]

.

[XCAdam89]

Looks Great!

PM me a paypal addy with the final address and I will get that out to you.

Also, please verify the shipping addy as well, just to make sure. Your going to reassemble as well right?? :confused:

[Pappy]

Ill put it back together for ya....

just pm me your address, no charge on this one. You support cody on your site so its all good

[Pappy]

Reassembled, just set your ride hiegth when you install it

[XCAdam89]

Got it today Pappy.

Thanks again. I'll be sending the fronts to laz/you again before the end of the year for sure! You guys did a great job.

[XCAdam89]

Quick Question Pappy, I'm new to setting up suspension.

The shock is really stiff right now, by setting "Ride Height" do you mean turn this?? I noticed you had it screwed down furthur then when I sent it to laz, so I assume that's whats wrong.

I figured I'd run it by you though..

[300ex_#387]

I don't mean to interupt, but yeah that is what you move to adjust the ride height. You move it up for a lower height, and move it down for a high ride height.

[Pappy]

Correct, that is the pre load adjusting ring. I just installed the spring and snugged it so the spring wasnt loose during shipment

[XCAdam89]

Alright. Thanks. So, I assume by turning it up a little the shock will get softer, correct?

[Pappy]

Yes, it should, but I am not familiar with how the shock worked prior to sending it out.

Roughly, when you press down on the grab bar, it should move smoothly to a point where you meet the bottom of its travel and spring back like an old caddy with worn monroe shocks...lol