A Arms ???

[GIXXER1KR]

I am debating on A arms but was curious about your guys opinions.I am going to be changing my Burgard +2+1 ST to a Long Travel design.I am debating +2+1 or +2+0.Not sure the difference.I know +3 would be the best handling but it's outta the ??? because i can barely fit it in the truck now and do get hung up 1 in a while in the trails.And are the max ground clearance any good vs reg arms and how does it effect handling????.Do they effect the handling??Heres a few pics!!!I want the best woods/mxer available and am debating between +2+0 or +2+1 and reg or high clearance LT!!!This is the high ground clearance..

[GIXXER1KR]

And the reg +2+1!!!!!!!!!

[xsr_racing28c]

Here is my current LT setup.. Jd Performance / PEP ( by far my favorite setup i've used)

THE ARMS ARE FOR SALE!!! $535 OBO.. They are like new and are only 4 months old and were used for TT so they weren't beat at all.

http://img.photobucket.com/albums/v622/xsr_racing28c/DSC00996.jpg

[GIXXER1KR]

Will i need lines too.I am running +2+1 ST and stock lines are fine???

[Pappy]

Lsr and Houser both have great arms with "max" clearence designs. I dont think they make a +3 but it is a +2.5

I have used the LSR and I absolutley loved them. Mine were the XC design and were +.5

You will more then likely want to switch to an extended brake line if anything past +2 is used, but I believe you can get away with stock but it will be best to check for any issues once installed.

I do not think the "max" clearence arms handled any differently over a standard arm.

[xsr_racing28c]

From experience i'd say you can use stock brakelines with +2 arms, but thats with the stock length steering stem. I used all stock brakelines up until i went with a +2 Houser Stem.

[GIXXER1KR]

Cool i am thinking +2+1 Long travel.Seeing i have +2+1 regular Burgards and havent had any problems.I am gonna call SMC Fab and see if he makes the Max clearance in LT!!!

[pudamac12]

yes he does bill. he just made a few sets for some people and they love them

[GIXXER1KR]

I d like to see a LT Max clearance pic!!!I think they look like chit though.Id probably be better off +2+1LT!!!I havent had a problem with my +2+1 ST!!!!Decisions decisions!!!Very close to making the phone calls to order!Motowoz and SMC LT arms.Just gotta figure out if i want the Max Clearance!!!!Any ideas!!!!

[pudamac12]

just to let you know if you ever bend a a arm steve at smc will send you a new one with no questions asked.

[baker250r]

the max clearance A arms are for the XC riders. u will be more stable at high speeds and cornering in motocross if u go with the regular LT arms

[pudamac12]

go regular clearance and like I said steve will take care of you if there are any problems with his products

[elementryder]

id say gibson cause there kinda like max ground clearence