'05 jetting

[kfxracer]

Ok,I got my hmf s/o and uni air filter tody.I plan to run it with no air box lid or snorkel.The pipe came with a 145 jet.My elevation is below 500ft, but not sea level.Do ya'll think this jet will work?THANKS!!!

[indyZrider]

yes it will work but i would go another size up to a 150

[kfxracer]

thanks

[kfxracer]

I got the jet in today,and it seemed to run right in the shop.I can't ride until tomorrow but I think it's right.THANKS AGAIN!!!

[indyZrider]

good deal now go and ride the he!! out of her!

[kfxracer]

I rode it today,it wouldn't run right without the air box lid but ran ok with it.I think it needs to be a size or two bigger because the bottom end wasn't as strong as it could be.I'm goin to the dealer wed. to buy a jet kit and get her dialed in.I have a 145 in it that came with the pipe,and I'm buying a dynojet kit.I would like to go to a 150-155 jet like the one that came with it.(not sure what brand the jet is???)What would you reccomend to start at with a dynojet?THANKS AGAIN!!!

[indyZrider]

i have the hmf s/o also with a k&n filter and i have a 155 dyno jet main in it with a 25 pilot jet about 2 3/4 turns out on the mix screw and a touch up on the idle. i also have an ehs lid on my box.

[kfxracer]

thanks!!!