PDA

View Full Version : some pics of my hybrid being built



nightmare311
09-27-2006, 02:49 PM
hope ya like

09-27-2006, 03:01 PM
That 520 should haul "Apples" when it's done:macho
It is a 520, right? :p

nightmare311
09-27-2006, 03:12 PM
nope sorry its a little 450

nightmare311
09-27-2006, 03:16 PM
one more

250x_kyle
09-27-2006, 05:40 PM
how much frame hacking do u have to do on it. im looken for a yzf426 for my 400ex and everyone i know that did a hybrid project did it with a 250r aftermarket frame.

nightmare311
09-27-2006, 05:46 PM
i havent did to much....only place where i cut was where the water pump is (the ktm's are vey high in the motor)

2muchquad
09-27-2006, 07:13 PM
Is the kickstarter going to clear the frame?

nightmare311
09-27-2006, 07:14 PM
no its not but i got a little fix for that....i'll post pic tomorrow after i do it...

nightmare311
09-28-2006, 10:50 AM
heres what i did.

ingleful
09-30-2006, 12:46 PM
i would like to see it all complete with plastics back on!!

nightmare311
09-30-2006, 04:33 PM
just give me a little more time..

gtilley45
09-30-2006, 06:08 PM
How did you extend the kicker out? When I got my LSR/CRF, they had cut the splines off the shaft, welded a piece in, and welded the splines on to the end of that. It worked OK but ended up breaking. I had to buy one of the Gibson kicker extensions from K&K.

nightmare311
09-30-2006, 06:38 PM
i cut the metal shaft part off the kicker not the motor... and welded it to a 1/2 thick steel stock it seem to be holding up..

rebelbuggy
09-30-2006, 08:24 PM
Originally posted by ingleful
i would like to see it all complete with plastics back on!!

Oh it looked cool with the plastic just sitting in place.
I just cant wait to hear/see it run, and to see how bad its going to leave me LOL

stocktires
10-01-2006, 05:31 PM
SICK!

yfz525
01-15-2008, 01:23 PM
I have built a similar project to you and My kickstarter wont clear

the frame I was woundering if you could show some pics of that

homemade kickstarter I'd appreciate it alot

Ogener
01-15-2008, 03:59 PM
I looked to me like the hose going to the resy for the rear brake master cylender was sitting on or really close to the exhaust.
just my .02