PDA

View Full Version : Post pics of the sickest 300ex's



honda416exman
09-02-2002, 02:25 PM
lets see em!!

DEAL
09-02-2002, 02:32 PM
:devil

#77
09-02-2002, 02:35 PM
Ok

09-02-2002, 03:01 PM
.

honda416exman
09-02-2002, 03:25 PM
pretty nice lets keep em comming... heres mine!

Butters
09-02-2002, 06:23 PM
how hard is it to put 400ex plastic like that on a 300??

honda416exman
09-02-2002, 06:33 PM
its not hard, you have to cut the hole for the gas tank part bigger , cuz 300 have bigger ones, and then u need a 400 seat, and to mount the front plastic, when u lay it on there u'll see ur old mounting thingies just use the l brackets, its easy took me half hour

Butters
09-02-2002, 06:35 PM
do you have to buy 400ex back plastic too or can you use stock?

honda416exman
09-02-2002, 06:47 PM
u got to buy the rear unless u trim the 400 fronts i did that when i ran blue fronts wit the headlights and my red 300 rears

Ex_Rider43
09-02-2002, 07:52 PM
sparky416ex have one of the sickest 300 I saw here

250xman
09-02-2002, 08:22 PM
its not a 300 but its mine!

toby400ex
09-02-2002, 08:55 PM
Originally posted by honda416exman
pretty nice lets keep em comming... heres mine!
hey im getting the silver maier shiny race plastic for the 400ex and putting it on my 300, i noticed that when i put the 400ex rear plastic on it was real close to the tires and i was wondering if you cut yours to make it look better or if that is a longer swingarm.

mxracer08
09-02-2002, 09:01 PM
here is a pic of my 300. Bad pic and w/ stock tires, but its all i got.

2k2-300exnj
09-02-2002, 11:23 PM
not mine but it is nice got it off ebay

QuadJunkies
09-03-2002, 12:11 AM
heres one of mine, not tons of mods yet, but it sure is purdy....:):blah

QuadJunkies
09-03-2002, 12:13 AM
oops, too big ..ill try again...

QuadJunkies
09-03-2002, 12:17 AM
heres is one of it with my new seatcover~

honda416exman
09-03-2002, 07:35 AM
toby300ex- no its a stocker alrite, and when i got the 400 fenders they were fine. i just cut em recently for looks.


Nice quads We need more people that are proud of there 300's or 250x's to post!!

exriderdude
09-03-2002, 10:05 AM
just wait till i take a pic of mine:devil

305exracer11
09-03-2002, 11:22 AM
mines still better than yours adam. and i might get a tc 350x motor that has 50hp.

toby400ex
09-03-2002, 02:07 PM
just wait a month then mine will be the shnit, in looks at least. Ohhhhhhhh silver is the best. And maybe some klotz graphics for the 400ex plastic, now that would be tight.

honda250xrider
09-03-2002, 03:35 PM
lets see the pictures before you all start saying your quad is the best

Butters
09-03-2002, 05:39 PM
250xman - is that white maier plastic shiny or dull? it looks shiny but i was just wondering cause i was thinking about white on my 300 and i like the look of yours.

Butters
09-03-2002, 05:50 PM
my 300ex.

Butters
09-03-2002, 05:53 PM
here is the underside of my 300. i have new skid plates on it now and thats about it.

09-03-2002, 06:31 PM
he said the sickest not the stockest

phatswinn
09-03-2002, 07:15 PM
heres mine when i got it

phatswinn
09-03-2002, 07:18 PM
and here it is now, just dont look at the dirt

phatswinn
09-03-2002, 07:18 PM
.

Butters
09-03-2002, 08:12 PM
well i'm sorry phatazz315ex i forgot i asked your opinion. i'll try and make a mental note next time that you will have a smart ***** comment.

2k2-300exnj
09-03-2002, 08:50 PM
chill man he is just trying to say that the post is ment to see the fastest or nicest or both looking quads i think mine is pretty decent but it is know where near as fast or nice looking as a lot of the ones on here so i didnt post plus i dont have a recent pic i will try to get one in a few days
take it easy extreme he was just makin a point not dissing your bike

465Stroker
09-04-2002, 09:20 AM
Here's a hot one. It's baby sister is for sale on Ebay right now.
Rick

exriderdude
09-04-2002, 10:01 AM
just read my sig and imagine:devil danny mine will blows yours away anyday, drag or track:blah

honda250xrider
09-04-2002, 01:03 PM
sorry but dont say MINE WILL BLOW YOURS AWAY ANYDAY its the riders ability to control the quad and ride it that makes it so good 95% rider 5% quad

chavez
09-04-2002, 01:16 PM
Originally posted by 2k2-300exnj
not mine but it is nice got it off ebay
this is billy hartleys old bike it won gncc 4stroke mod class a few years back its acomplete laegers 300 ex

09-04-2002, 01:26 PM
more like you won with it. not!!!!!!!!!!!!!!!
where is my plastic?

nathan

09-04-2002, 01:38 PM
chaves is that the quad that was at Reno a couple of times last year? With the tc 400 national kit in it?

09-04-2002, 03:13 PM
Traci's 300 that 465 stroker posted is the most pissed off 300ex i've ever seen...:macho

Buzzsaw
09-29-2002, 03:19 PM
Krotky 316

Live2Ride300
09-29-2002, 04:23 PM
Heres mine, more on the stock side..., sh.tty picture of it

phatswinn
09-29-2002, 05:00 PM
heres a new pic of mine

sprtrx300ex
09-29-2002, 06:15 PM
Thats a tight light. What kind is it?

phatswinn
09-29-2002, 07:33 PM
i donno, i got it at wal-mart:D

2k2-300exnj
09-29-2002, 09:21 PM
wow this post emerged from darkness it was from like 2 months ago

BigRider69
09-30-2002, 07:49 PM
she's all I want. I take special care of her, sometimes
she even talks to me. Its weird, or maybe its me

toby400ex
09-30-2002, 08:07 PM
sorry guys but tomorrow ill have to show you all up, as soon as i get the pics :D

250x#93
10-01-2002, 05:10 AM
Not a 300 but oh well:blah

ride300exred
10-01-2002, 07:26 PM
Before

ride300exred
10-01-2002, 07:28 PM
Its for sale now
Wanna buy it ?

10-01-2002, 10:11 PM
I don't think this is gonna work but i'll try.
Nothing great but here's my old one. I had shredders on there and they looked alot better than those g@y things.http://300ex_clean

10-01-2002, 10:15 PM
how do you post pics fellas! :confused:

lil400exman
10-02-2002, 07:30 AM
i am so glad i have a 400

toby400ex
10-02-2002, 07:33 AM
ok guys im njot sure if this is going to work but here it is if it does, and yes it is a 300ex i just put the new plastics on monday and it is sweet. oh it didnt work to copy paste since im at schoo ill have top get back to you later.

TRX_Thumper
10-02-2002, 04:43 PM
lil400exman-that wasnt right....dont be dissin our 300's lets take it to the woods....where top speed doesnt matter....ok ? u think u can take me? u probably do because no u havnt saw me an 300 race any harescambles.....boys there aint a thing wrong with 300ex's....lets be proud.....

ride300exred
10-02-2002, 05:28 PM
Best of both worlds.:D

toby400ex
10-02-2002, 05:36 PM
here is a pic, it doesnt show the whole thing but you can get the idea.

toby400ex
10-02-2002, 05:37 PM
heres another ill have to get some better pics

ride300exred
10-02-2002, 06:11 PM
Its innovative;)

Live2Ride300
10-02-2002, 06:38 PM
My 2000 300EX. Mods on the way - raptor shock w/ 400ex, already have the spring, just waiting on a deal with the shock, 20 inch rear razrs, 21inch front razrs, 14t front sprocket, k+n filter, removed chock, 40 or 42 pilot jet, hetricks full exaust, or powroll headpipe and a slip on pipe, not sure what kind I want yet.

10-02-2002, 07:53 PM
ok here we go, like i said, it's not much but here it is
i sold it now for a 400EX. my bro just got a KFX too, that thing is sweet, i'll try to get some pics

10-02-2002, 08:28 PM
heres a before and after, i had different tires on there too

bradley300
10-02-2002, 09:58 PM
i have a pic in the classified forum but dont know how to move it here. you can go look though! "lrd/elka 309ex for sale"

bradley300
10-02-2002, 10:05 PM
i'm gonna try this-

bradley300
10-02-2002, 10:07 PM
woo hoo! i'll try that again-

QuadJunkies
10-02-2002, 10:18 PM
that is nice..good luck, hope it sells fast!!!:)

2k2-300exnj
10-03-2002, 01:58 PM
well maybe it isnt the sickest ive seen but it is mine and i see it often lol does that count i am getting there though now that i have the axle i figured i am worthy to post

QuadJunkies
10-03-2002, 02:52 PM
Originally posted by 2k2-300exnj
well maybe it isnt the sickest ive seen but it is mine and i see it often lol does that count i am getting there though now that i have the axle i figured i am worthy to post ..Your post is WORTHYregardless of your mods or not!:) I dont have lots either, but I still think she is sweet!;)

Live2Ride300
10-03-2002, 04:54 PM
Nice 300s bartman, brad, and 2k2-300exnj,

Hey bartman is that the stock front fenders that you race cut'ed. That looks awesome.

ride300exred
10-03-2002, 06:20 PM
Shes for sale too.

ride300exred
10-03-2002, 06:22 PM
From the back

2k2-300exnj
10-03-2002, 06:54 PM
since i got a compliment i will post the other two

2k2-300exnj
10-03-2002, 06:55 PM
last one

Poncho
10-03-2002, 08:03 PM
Here's my old 300ex. It was pretty nice...

Poncho
10-03-2002, 08:05 PM
It's not the best but it was pretty sharp and alot of people liked it...

Poncho
10-03-2002, 08:06 PM
a 330ex...

Poncho
10-03-2002, 08:10 PM
Can anyone guess who the goofy kid is in the pic?:rolleyes:

10-05-2002, 02:22 PM
Yeah, those were the stock fenders, they weren't even though cuz I had to cut around those !@#$% warning labels. But it stilled looked pretty good. I got more pics of it on my website www.geocities.com/spazman_43/bmon

Live2Ride300
10-05-2002, 04:30 PM
Damn geocities site, lol the link didnt work:(

GT300
10-05-2002, 07:02 PM
worked for me. I like the part about if you don't like my site

Sparky416ex
10-05-2002, 07:50 PM
LOL..mine doesnt compare to the other in here...i liked that other orange one best...that was awesome.

Sparky416ex
10-05-2002, 07:53 PM
another...i just ordered elka...cuz i blew out my stock shocks...so ill get pics soon

Live2Ride300
10-05-2002, 08:07 PM
nice quad sparky, that thing is gonna be sweet with elkas. Those lights look cool.

skull
10-06-2002, 03:08 AM
here's mine. I now got an AC (new style) bumper kickin.

toby400ex
10-07-2002, 09:19 PM
here is one from sundays race after i passed a blaster on the way to a small jump, everything held up except for those damn tie rods.:mad:

Buzzsaw
10-07-2002, 09:39 PM
Sparky416ex thanks man

300EX KING
10-08-2002, 11:53 AM
Those are some nice pics guys, i wish i had a scanner so i could send in some pics of the king.

Live2Ride300
10-08-2002, 01:28 PM
what happened to ur tie rods?

iceman2488x
10-09-2002, 05:03 PM
ok, the comment some guy made about it being 95% rider and 5% bike is wrong.....you could be the best rider in the world but if your $hit wont go fast you will finish last! ....its like a 50/50

2k2-300exnj
10-09-2002, 05:57 PM
Originally posted by iceman2488x
ok, the comment some guy made about it being 95% rider and 5% bike is wrong.....you could be the best rider in the world but if your $hit wont go fast you will finish last! ....its like a 50/50
so if you gave an 8yr old a raptor fully modded and a pro racer an xr70 the 6yr old would win?

ride300exred
10-09-2002, 06:23 PM
Originally posted by 2k2-300exnj

so if you gave an 8yr old a raptor fully modded and a pro racer an xr70 the 6yr old would win?

Whats the 6yr old riding LOL :D

2k2-300exnj
10-10-2002, 12:53 PM
lmao that was great i try to be smart and sound even dumber lets try that again... would the 8 yr old win?

ride300exred
10-10-2002, 02:02 PM
everybody makes mistakes , Its fun to laugh about them . Ha like today at work I put 2 bifold doors in upside down , I'm sure the owner wouldnt like that 2 much . hehe
:p :huh :D :rolleyes:

toby400ex
10-10-2002, 06:36 PM
Originally posted by Live2Ride300
what happened to ur tie rods?
well it may have not been the tie rods fault when i ran into a tree and made the wheels point different directions // [] it looked kinda like that when i tried to make one wheel go straight:D

toby400ex
10-10-2002, 06:39 PM
Originally posted by iceman2488x
ok, the comment some guy made about it being 95% rider and 5% bike is wrong.....you could be the best rider in the world but if your $hit wont go fast you will finish last! ....its like a 50/50 hey are you sayin im a bad rider, i just wasnt used to my new front end that is like have +1 a arms. It had been sitting in the garage due to s h i t t y shipping of parts. So i wasnt used to the extra width and the fact that i hadnt been on a good ride for about a month except for the paractice lap.

TRX_Thumper
10-12-2002, 10:29 AM
heres mine.....

2k2-300exnj
10-12-2002, 11:56 AM
Originally posted by TRX_Thumper
heres mine.....
ditch those handle bars and get a new light set up and it will look nice...
u are using a 150 main!? where do you live?

TRX_Thumper
10-12-2002, 12:40 PM
i live in tennessee...stock was a 122...needless 2 say its sucks the gas but im running that high a jet from my custom carb and intake mods....it has great power.....will run beside any 300 with a cam an piston...yeah i need some renthals bad

410exracer4
10-13-2002, 02:56 PM
no pics of my quad yet but here are the mods:
bored to 410
race cam
piston kit
ported head
fmf hi-flo header
fmf powercore 4 scilencer
ronnie's racing air box
hotter plug
400ex tires
ac racing front bumper
ac racing nurf bars
denton racing swing arm
durablue elimanator x-33 axle
pro design kill switch
renthal handle bars
renthal grips
fmf seat cover
blue maier race cut plastic
nac's racing graphics

mods to come later this year:
works shocks
hand guards
leager a-arms
powder coated frame

:D

honda250xrider
10-13-2002, 04:52 PM
wow what kinda fuel do u run? man i bet that runs hot do u have a oil cooler or anything to cool that engine

TRX_Thumper
10-13-2002, 05:35 PM
...

2k2-300exnj
10-13-2002, 07:45 PM
it sounds a little suspicious but dont bash him yet you never kno

410exracer4
10-13-2002, 07:51 PM
i just had the bore done.i dont have a problem with the front end on the 300ex's but i did want to be able to slide the rear end out easier so i replaced the rear end.i only work in the summers because of school so i cant buy everything all at once.yes it does run hot.right now im runnin 93 octane gas with an octane booster.if u still dont believe me email me.

Buzzsaw
10-13-2002, 08:04 PM
It want last running pump gas. if that work is done by Pro Fab they dont recommend pump gas in their 330 kits

toby400ex
10-13-2002, 09:02 PM
Originally posted by TRX_Thumper
ok do i smell bs? this is the guys 1st post...and he says it is bored to a 410...the most u can bore a 300 to is a 330...u must stroke it after that...that thing wouldnt last 30 minutes without super high octane and/or oil cooler....and who would still be running the stock front end on a 410??? with an aftermarket rear end:eek:
yeah but he says he is running a hotter plug so he must know somethin,lol and the whole nacs graphics, maybe ive just never seen or heard of nacs 300ex graphics.:confused: :blah

QuadJunkies
10-14-2002, 10:54 AM
Originally posted by GT300
worked for me. I like the part about if you don't like my site Hey,I tried to Pm you about the question you had thought you should know your folders are full,delete them and Ill send you the info you wanted:)

410exracer4
10-14-2002, 08:26 PM
your right nac's doesnt make graphics for a 300ex but the simple fix to that is buy 250r grpahics.it doesnt quite fit perfictaly but it still looks good.when i get my scanner fixxed i'll post some pic's of it

GT300
10-15-2002, 01:42 PM
Originally posted by QuadJunkies
Hey,I tried to Pm you about the question you had thought you should know your folders are full,delete them and Ill send you the info you wanted:)
All fixed. sorry

2k2-300exnj
10-15-2002, 01:45 PM
in january i will be giving buzzsaw a run for his money i think his is the nicest so far

honda250xrider
10-15-2002, 02:00 PM
i would recommend running race fuel high octane booster actually makes your fourwheeler run hotter

2k2-300exnj
10-15-2002, 02:11 PM
Originally posted by honda250xrider
i would recommend running race fuel high octane booster actually makes your fourwheeler run hotter
who?

toby400ex
10-15-2002, 02:46 PM
i think its the new guy:confused: new fich new fich new fish, dont drop the soap :D just jokin hope you like the site and stay for a while.
;)

Buzzsaw
10-15-2002, 06:39 PM
2k2-300exnj Thinks, but in jan. i will have the pic of My new LSR +2 rear end

96300ex
10-15-2002, 06:53 PM
Wait until i get my prodject quad up on here. Chromalusion painted frame, a-arms, and swingarm.... new shaved stock 300ex plastic (or fullbore, depending on how much money i got left over)... 2inch extended swingarm... and a built 390 stroker on the alky-hol:D

wanted her to be a stock looking sleeper, but the chromallusion was so tempting...

2k2-300exnj
10-15-2002, 07:04 PM
Originally posted by buzzsaw300
2k2-300exnj Thinks, but in jan. i will have the pic of My new LSR +2 rear end
oh yea! lol well i wont!!! so there!!! lmao

10-17-2002, 12:38 AM
hey 96300ex
sounds like a kick ***** ride- get some pics on here boy!
oh yeah-i'd go with fullbore

Buzzsaw
10-17-2002, 07:15 AM
new wheels on

96300ex
10-17-2002, 08:46 AM
Buzzsaw, i love that bike!


Bartman-
well not much to post... the block is at the shop getting bored (case halves too, monterous bore:devil ) i got the piston, ring, stroker crank, connecting rod, and clutch sitting in a box. The frame is painted and man it look great, DuPont chromalusion red (shifts from a deep cherry red to fire engine red to a reddish orange) and i got the head here too, i'm thinking about putting it on my daily rider quad just to see how she acts. Still need to get the swingarm extended and paint that (i was thinking just flame red with a couple layers of clearcoat) and the plastics on this dude were shot to h*ll, i'm thinking yellow fullbore if they make it. Hopefully it will stay on the ground with a +4 swingarm, and i won't need a lowering kit. can't wait to got try out all the stock Craptors and Z's down at the gravel pit:devil

buy me a camera and i'll post pics, lol

Moddedx
10-18-2002, 12:49 PM
I dont have pics of my 250X since I am redoign it as we speak, but this is the nicest 250x i have seen on here:

Chris's 250x
http://www.exriders.com/rides/rides_large/250x3_3.jpg

And this is the nicest looking X/EX rider I have seen on here:


http://www.exriders.com/rides/rides_large/300ex6_10.jpg

No offense Rick! :)

Live2Ride300
10-18-2002, 02:09 PM
buzzsaw that thing is so nice, do u have neother pics of it?

10-18-2002, 02:49 PM
i ownder if my warrior will run with yalls 300ex's ???? lol

Moddedx
10-18-2002, 03:01 PM
Originally posted by EXracer8601
i ownder if my warrior will run with yalls 300ex's ???? lol Funny, but my guess is probably not! :)

10-19-2002, 02:32 PM
Originally posted by Moddedx
Funny, but my guess is probably not! :)

my warrior did beat my 400ex :devil

ride300exred
10-19-2002, 02:42 PM
I'll race ya ... :D

jwisniew
10-19-2002, 02:58 PM
here's my 300, i bought it from bartman

HotRod2Fitty
10-19-2002, 08:49 PM
Heres my X. Same Difference

jwisniew
10-19-2002, 09:50 PM
here's my 300, i bought it from bartman

Sparky416ex
10-20-2002, 12:36 AM
Originally posted by 2k2-300exnj
it sounds a little suspicious but dont bash him yet you never kno

:huh

2k2-300exnj
10-20-2002, 07:54 AM
Originally posted by Sparky416ex


:huh
i believe him now but i was a little curious to if he actually had all that and no oil cooler but i didnt not believe him completely

nice bike man i wanna see some pix when u can

410exracer4
10-20-2002, 03:36 PM
somebody sugested that i run race fuel in my quad since its been bored so far.right now im runnin 93 octane plus an octane booster.is that enough or should i switch to race fuel.i also know a guy who runs av gas in his 250r.i was wondering would it be safe to run av gas in my 410?and if it is safe will they let me use it in a mx race?

96300ex
10-20-2002, 04:30 PM
if you're not having problems with detonation (pinging) then race gas is a waste of money

Moddedx
10-21-2002, 01:43 PM
Does anyone know who owns this quad???

http://www.exriders.com/rides/rides_large/250x3_3.jpg

Does the owner still frequent this message board?

honda250xrider
10-21-2002, 01:51 PM
his s/n on exriders is StarkRacing

Moddedx
10-21-2002, 02:03 PM
Originally posted by honda250xrider
his s/n on exriders is StarkRacing

Cool thanks, I thought that X looked familar!

300EXrider02
10-21-2002, 02:24 PM
still my favorite quad out!!:D :D

Moddedx
10-21-2002, 02:52 PM
Originally posted by 300EXrider02
still my favorite quad out!!:D :D

Thats a nice quad, but those Fullbore plastics make it look like a duck! The nose is too long! I like Fullbores 400 and R plastics, but not the 300/250X plastics.

ny300exrider
10-21-2002, 04:53 PM
i know by every chance this isnt sick but it is a 300 and it has some things done lol.

Rastus
10-21-2002, 05:01 PM
Mine: I know, the rear plastics are high in there rear, I've fixed that, but no recent pics...:(

250x#93
10-22-2002, 02:12 PM
HotRod2Fitty

Nice looking 250x:cool:

300exQuadracer
10-22-2002, 02:39 PM
Heres my 300ex nothin special but it looks and is a lot nicer in person

300exQuadracer
10-22-2002, 07:45 PM
oops guess the pic didnt load we`ll try it again

HotRod2Fitty
10-22-2002, 07:53 PM
hey 250XREDRIDER
thanks
plus im getting the motor rebuilt and works shocks for christmas........i cant wait lol.

300EXrider02
12-06-2002, 11:07 AM
i will stick here and say i would rather ride this

300EXrider02
12-06-2002, 11:07 AM
i will stick here and say i would rather ride this, and that woman

Moddedx
12-06-2002, 11:21 AM
Originally posted by 300EXrider02
i will stick here and say i would rather ride this, and that woman

Holy Jebus, I wish she was sitting on my um..ah..emm... Fourwheeler! :)

Moded86R
12-10-2002, 12:16 PM
Nice bikes guys.Real nice bikes!

Hotrod2fifty.I love that bike.I sat there and drooled at it.


I just started a new 250x/300ex project.So far I only have a complete front end,gas tank,steering stem,I was lucky and found a good deal on this stuff.(thanks jerry-89-250r)I am going to use 400ex A-arms,Stock 300 swingarm.The frame,hubs,A-arms,swingarm are all going to be powdercoated glossy black.With black plastic and everything else is going to be silver or chrome.Kinda like an old harley.


I will post pics as soon as I get something to take a picture of!

Live2Ride300
12-10-2002, 01:40 PM
Originally posted by 300EXrider02
i will stick here and say i would rather ride this, and that woman

Id ride the chick first, then the quad.

300exjuggalo
12-10-2002, 06:01 PM
here's mine im gunna do some stuff to it but i just got mine and dont got the money, plus im savin up for my 97 Honda Prelude:D

HotRod2Fitty
12-10-2002, 06:15 PM
Modded86R thanks I really tried to make it sharp looking. You should see it now, it has wheel rings, works duals w/rezzies in the front and a raptor shock in the back. Now im ready for some woods racing action.


Matt

Moded86R
12-10-2002, 09:11 PM
Oh yeah I used your 250 as my new background.

exriderdude
12-11-2002, 07:51 AM
Originally posted by honda250xrider
his s/n on exriders is StarkRacing


if i remember right, he sold it for some reason. that really is a sweet quad.

300EXrider02
12-11-2002, 11:44 AM
exriderdude, u got pics of your quad or spacers?

HoNdAdude48
03-02-2003, 03:11 PM
hey yall dont dog on that kid that said he had the 410, they did the same to me, lol its a tc racing kit they make, yes you do hqave to stroke it too, he knows what hes talkin about i think, so dont dog him,

ill get some pix of my 300 in the next couple of days posted up.

250x#93
03-02-2003, 08:45 PM
i will stick here and say i would rather ride this, and that woman

Shes hot!!! I have that issue best one yet!!:devil

Hondadude u gonna take a crf250x and put it in a 300, that sounds like a sweet idea, plus its liquid cooled:devil

KrazyKid300ex
03-02-2003, 10:41 PM
You can qoute me on this.... "I WILL have 1 of the sickest 300ex's soon enough" it will be better once i bore it but without the bore it will still be sick!

ny300exrider
03-02-2003, 10:55 PM
yup same here!!!!!lol me and justin are doing some similar mods and they are gonna be eye catching 300's when were done

KrazyKid300ex
03-02-2003, 11:11 PM
i think mine is better because the fast that its yellow!

300EXrider02
03-03-2003, 12:22 AM
umm...hey justin what mods do you have now? lol jk
i am going to sell the 300 in the summer/fall and get the crf250r or crf450r quad:bandit:

crap-banshee32
03-03-2003, 01:50 AM
sweet

Brad
03-03-2003, 02:02 AM
wow this is a lond thred

Brad
03-03-2003, 02:03 AM
second

toby400ex
03-03-2003, 02:23 AM
Originally posted by Brad
wow this is a lond thred
this thread is also very old:eek2:

Brad
03-03-2003, 09:31 AM
it was at the top of the thread list

when i responded 2 it , it was like 2nd or 3rd

exriderdude
03-03-2003, 01:00 PM
i will put some pics of mine up this weekend;)

305exracer11
03-03-2003, 01:15 PM
ill have some updated pics of my quad,got my frame pc'ed red

Live2Ride300
03-03-2003, 11:12 PM
Sick 300 in sick action-:devil

My front yard snow double-

Live2Ride300
03-03-2003, 11:17 PM
I gotta get some new still pics of my quad

sprtrx300ex
03-03-2003, 11:27 PM
Thats a nice jump.

QuadJunkies
03-04-2003, 05:25 AM
Originally posted by Live2Ride300
Sick 300 in sick action-:devil

My front yard snow double- LMAO.. Ok.. Im dying to find out what the neighbors were thinkin..:p I know mine would have called the cops one me:grr

300EXrider02
03-04-2003, 06:14 PM
live2ride, that is a nice jump, for snow, how are those shocks holden up? and you tell me whenver you wanna sell that rear raptor shock!:p , or tell me if you find a raptor shock for sale...

quadjunkies, you put that dial a jet in? how did it go?

QuadJunkies
03-04-2003, 06:34 PM
Originally posted by 300EXrider02
live2ride, that is a nice jump, for snow, how are those shocks holden up? and you tell me whenver you wanna sell that rear raptor shock!:p , or tell me if you find a raptor shock for sale...

quadjunkies, you put that dial a jet in? how did it go? I didnt fair so well with itonthe 400ex so I didnt even attempt to use it one the 300ex you can get some idea of the product on this thread, I just wasnt as convinced aboutthe product, and if I ever needed any work done on it, no one will touch it with a dial a jet on it..:( http://www.exriders.com/vbb/showthread.php?s=&threadid=46434&highlight=dial+a+jet%2A

BLURR250X
03-05-2003, 12:06 AM
Here's a couple pics of mine.

BLURR250X
03-05-2003, 12:08 AM
one more

quadrcr87
03-05-2003, 12:08 AM
heres mine is a 87' 250x i bought it for $500 looked like trash this is how it now looks

HiperEX
03-05-2003, 12:09 AM
heres a few of mine new tires should be here by the end of the week i hope

HiperEX
03-05-2003, 12:10 AM
another

Brad
03-05-2003, 12:14 AM
that black 250X looks awesome

QuadJunkies
03-05-2003, 08:52 AM
Originally posted by BLURR250X
one more dang!!! I like your set up there..:cool: what are you a +5...:eek:

MX26
03-05-2003, 10:21 AM
Here's a couple of my friend Stephen's old 330X

RiPPiNiTuP7
03-05-2003, 10:50 AM
Originally posted by MX26
Here's a couple of my friend Stephen's old 330X

Wow...

quadrcr87
03-05-2003, 11:15 AM
Thanks for the somplement on my black 250x here is another pic

MX26
03-05-2003, 11:20 AM
The other pic is too big..

BLURR250X
03-05-2003, 07:40 PM
Thanks QuadJunkie.No I only have +3 Burgards on the front and a +4 Durablue on the back.It handles great in corners.Now I just need to get more power out of it.

quadrcr87
03-05-2003, 07:50 PM
How much were the a arms and where did you get them?

QuadJunkies
03-05-2003, 11:28 PM
Originally posted by BLURR250X
Thanks QuadJunkie.No I only have +3 Burgards on the front and a +4 Durablue on the back.It handles great in corners.Now I just need to get more power out of it. I need to get set up slowly for fall racing...I need to find out what is best set up for me first. Your ride is very sweet though...:cool:

HoNdAdude48
03-06-2003, 06:22 AM
quadrcr87- nice quad, looks about like mine exept mine has stock front plastix, i think u need to get some holeshot mx 20' fronts & 18' rears and a ac new style bumper and that thing would look b.a.

ill get some pix of mine up shortly!

BLURR250X
03-06-2003, 07:43 AM
I bought them used from someone in here last year.I paid about 300 for them.I think for new ones they run around $500.I think K&k ATV sells them. There website is www.kandkatv.com

exriderdude
03-06-2003, 07:56 AM
Originally posted by MX26
Here's a couple of my friend Stephen's old 330X


that thing is sweet, theres a guy around here that did that too, but his looks like crap:rolleyes:

MX26
03-06-2003, 11:02 AM
that thing is sweet, theres a guy around here that did that too, but his looks like crap

Yeah, it is a very nice bike. He sold it to a guy in southern Louisiana and the dude didn't take care of it. The pic I posted is from after he sold it. Stephen kept that thing in top notch condition. The motor was a full blown 330 stroker, lectron carb, laeger a arms, Works Stadium shocks all around, swingarm, etc. I think he ended up selling it for $4500. If anyone can do it, i'll send a pic of when he had it to be resized.. I just don't know how.

exriderdude
03-10-2003, 08:03 AM
it says my pics are too big, oh well, here is a link to some pics of mine... http://exriders.com/vbb/showthread.php?s=&threadid=41920&highlight=finally

quadrcr87
03-10-2003, 01:23 PM
i like the plastic its sweet and it alot like mine. how do you like the works shocks are those stock a arms?

exriderdude
03-11-2003, 07:44 AM
the works shocks are alright, better than stock but far from the best.

yea those are stock a-arms.

Crazy Honda
03-12-2003, 12:16 AM
Hears mine ill see if I can get on with the full finders (sp)

KrazyKid300ex
03-12-2003, 04:41 AM
Originally posted by Crazy Honda
Hears mine ill see if I can get on with the full finders (sp)
do people go to school?:rolleyes: :confused: :eek2: :huh very surprised.... fenders...crazy... fenders...

muff
03-12-2003, 04:51 AM
one of our smaller jumps

http://www.imagestation.com/picture/sraid47/p07037faffcf83a552d772bfe4c9848c9/fcc1b1fa.jpg

Sparky416ex
03-12-2003, 01:55 PM
We just took mine to lancaster ohio (pro fab) we are putting two grand in it...he says its gonna beat a 400ex...hes doe lots of them...ill post pics when we get it back

305exracer11
03-12-2003, 08:24 PM
sparky what kit are u getting the 330? pro fab does some good work

TRX300X
03-12-2003, 09:18 PM
Click here for pictures of my 300X (www.geocities.com/stoaste/quadpics.html)

Check out my ride

Crazy Honda
04-04-2003, 04:48 PM
Originally posted by KrazyKid300ex
do people go to school?:rolleyes: :confused: :eek2: :huh very surprised.... fenders...crazy... fenders...

sorry brain fart +late night = finders :confused2 anyway here we go

Crazy Honda
04-04-2003, 04:50 PM
one more

danney f
04-04-2003, 05:51 PM
Well mine is no where to being the sickest looking it still looks pretty healthy:D j/k

But I have all the performance that I want for now, except for suspension. So I have started on a external make over. Here is what I have done so far.
This is a pic of the FMF muffler I did, in the picture I had Powder coated the head pipe with High temp silver. I have since striped the head pipe back down and ceramic coated it. (see 2nd pic) I like it much better.

danney f
04-04-2003, 05:53 PM
ceramic coated head pipe

danney f
04-04-2003, 05:57 PM
here is the clutch cover that I just did the other day along with the oil cover and the other little brackets. I would have done more but had to get it back together so I can go ride Saturday. First time in like 2 months:confused2
The pics are not that great, had to take them indoors since it is raining.

Live2Ride300
04-04-2003, 06:33 PM
Originally posted by sprtrx300ex
Thats a nice jump.

Thanx man:D


Originally posted by QuadJunkies
LMAO.. Ok.. Im dying to find out what the neighbors were thinkin..:p I know mine would have called the cops one me:grr

Lol, the nieghbors didnt say anything about it, lol, they must have looked about their window and were like :eek2: lmao


Originally posted by 300EXrider02
live2ride, that is a nice jump, for snow, how are those shocks holden up? and you tell me whenver you wanna sell that rear raptor shock!:p , or tell me if you find a raptor shock for sale...


Thanx man, it took alot of work to build, it took a few days to get it good, my shocks are holding up great so far, they soak up the landing awesome. Try at bluetraxx for a raptor shock, or atvconnection, i'll send u a pm if i see any newhere

Live2Ride300
04-04-2003, 06:35 PM
Originally posted by danney f
ceramic coated head pipe

The headpipe and clutch cover look awesome man!! Do you have any pics of ur whole quad? How do you like the 313 kit?

danney f
04-04-2003, 07:53 PM
Posted by Live2Ride300
"Do you have any pics of ur whole quad? How do you like the 313 kit?"

I do but I will try and get som fresh ones tomorrow before I go rideing. the 313 kit gets the job done. I don't have time to go race it or anything like that, so it is only used on the trails and some yard drag raceing with my freinds. I can stay dead even with my friends piped 400ex all the way to 5th but I hit the rev limit in every gear. seems like it hit way to early. I have been clocked at 70 and that is with it hiting the rev limit. Thanks for the compliment.

Live2Ride300
04-05-2003, 03:06 AM
Originally posted by danney f
Posted by Live2Ride300
"Do you have any pics of ur whole quad? How do you like the 313 kit?"

I do but I will try and get som fresh ones tomorrow before I go rideing. the 313 kit gets the job done. I don't have time to go race it or anything like that, so it is only used on the trails and some yard drag raceing with my freinds. I can stay dead even with my friends piped 400ex all the way to 5th but I hit the rev limit in every gear. seems like it hit way to early. I have been clocked at 70 and that is with it hiting the rev limit. Thanks for the compliment.

Sounds awesome, you could get a sparks racing or TC racing rev box to fix your problem of hitting the rev limiter.

danney f
04-05-2003, 12:30 PM
OK, I final had time to get a fresh pic. It's a work in progress.

Live2Ride300
04-05-2003, 12:37 PM
Originally posted by danney f
OK, I final had time to get a fresh pic. It's a work in progress.

Nice man that looks awesome I love the pc job, sweet ride. All you need now is some suspension and ur set! sweet ride!!

danney f
04-05-2003, 12:43 PM
Well it's not done yet I plan on stripping it bare and PCing everything and getting new plastic. Than maybe some new suspension. Thanks for the compliment

WildCatRacer
04-07-2003, 04:31 AM
pics of my 300ex:

www.geocities.com/quadrcr4/350x

pics of my 250x:

www.geocities.com/quadrcr4/laegers

300EXrider02
04-07-2003, 05:37 AM
your machines are awesome, i want that 250x, holy crap it looks sweet, what size swing-arm, +4?

WildCatRacer
04-07-2003, 11:27 AM
thanks for the compliment. that swingarm is a stock 89 lengh 250r laegers swingarm. its a full laegers chassis with a pro-trax t-pin front end, zps shocks and cr500 link in the rear. it also has a FDO 365 motor in it. hopefully it will be a 416 soon. Im sending the motor down to ohio later this week.