Wheel Spacers

[baker400ex]

I have a 06 400ex and I heard about wheel spacers. Numerous people said they're great for a cheap investment and others said it harms your axle and a bunch of other parts. I dont ride mx alot but i have a back yard track I was jus wondering if if they're bad for the rear end of a quad or if they dont phase it ?


Please n thanxz for ne help at all

Baker

[81 clark racing]

i hav durablue spacers in the front an rear. i jump an ride them hard i havnt cracked them or had any problems with them

[400 SS EX]

I use them on my back and had them on my front. Since I have gotten ext. a arms, i think my spindle was tweaked slightly with them on. The back I use strickly for racing ( flattrack) and they still bent my hubs. The hubs should bend before your axle. I would highly not recommend jumping. Another thing to keep in mind is how they work. Durablue makes you knock out the wheel studs and use a nut and bolt combo- a big pain in the *****. G-force from rockymountain has the best setup for wheel spacers, and if I were to buy another set that's what I would go with.