250x 300ex parts

[honda250xrider]

im getting rid of alot of parts from my 250x you name it i more than likely have it.

lecton carb w/extras steel braided cable also stock cable- $60
leager swing arm- 200
elka full adj. rear shock- 400 obo
elka full adj. fronts- 400 obo
lsr axle w/lsr hubs- 250
burgard +3+1 a-arms - 225
sparks cdi- 50
race ported head, +3 intake +1.5 exhaust, stiffer springs-250
tc pipe-100
fst- cam 75
fst- oil cooler-50
stock spindles
frame
stock rear shock
tons of stock parts make offers

have tons of stock parts just let me know what you need
had 2 race motors so you need a part i can more than likely get it for you, I can get you as many pics as you want just let me know, i know i dont have alot of parts up but honestly i have just about to much to list so if you need any parts minor or major just let me know and i can get you a price.

[enduro400rider]

any pics of the pipe?

[enduro400rider]

also do you have any standard bore high compression pistons in good shape?

[300ex_#387]

Give me a picture of the pipe and swingarm. Very interested.

[honda250xrider]

the swingarm is pretty dirty right now i should of cleaned it up a bit but im in a hurry, the pipe still looks fairly well needs polished up a bit, the pipe does have a few dings in it but i don't think it is anything major, the swingarm has the bolt broke that goes into the holder for the brake line, I have always zipped tied the brake line down and have never had a problem, it looks like the bolt could be a pain to get out thats why i never really tried. if you need more pics just let me know i will try and clean some things up but you get the general idea.

[XCAdam89]

Pics of the Elka's and would you partially trade for a set of Works DR with Res??

[XCAdam89]

What are the Elka's set up for??

[honda250xrider]

forgot to add the swingarm is 1 1/4 longer than stock. I do not have any high compression stock pistons, i do have some big bore sleeves, cam's, etc if your interested.

[honda250xrider]

shocks were valved for +3+1 a-arms, 175lb rider, A class mx, the rear was valved for the same just with the 1 1/4 longer swingarm, sorry no trades as i need the money at this time full time college student.

[XCAdam89]

Take $200 for the Burgards?

[rebelbuggy]

do you have a bearing carrier for a 300ex ? or are you selling it with the swingarm?

let me know and if so how much shiped to 30127, thanks

[honda250xrider]

200 plus shipping and there sold. ill get you a few pics, the bottom's could use a new pc job but i guess a good clean up would still be looking decent, with the right tierod taking them off today i noticed that the end threading part looks to be slightly bent, i think this is easily fixable with a torch and a vice.

[honda250xrider]

here is a pic of the tieroad, look at the threaded part and you can see a slight bend, like i said i think you can fix this with a torch and a vice. should clean up the tierod to see a lil better but i think u get the idea.

[honda250xrider]

yes in fact i just installed a brand new bearing carrier and have only ridden on it for maybe at the most 2 hours, i'd take 65 shipped for it i will get you a few pics, this is a dual row if i remember right. let me get the axle off the swingarm and i can get you a few pics.

[rebelbuggy]

Originally posted by honda250xrider
yes in fact i just installed a brand new bearing carrier and have only ridden on it for maybe at the most 2 hours, i'd take 65 shipped for it i will get you a few pics, this is a dual row if i remember right. let me get the axle off the swingarm and i can get you a few pics.

Okay thanks that be great. if you dont want to post on here, you can email to night_prowler26@yahoo.com
thanks

[enduro400rider]

what kind of big bore sleeves and piston set ups do you have and how much do you want?

[paintfumes]

Pm sent!

[honda250xrider]

well if i remember right it is a 90mm piston and sleeve with the jug, also have a 330 or 295cc sleeve. i think i have a few more let me go look and ill post some more. I have a crank that has a heavy duty rod and is stroked by powroll. My race head was done by scott at pro fab atv, along with the big bore kits, also i have no pm's paintfumes.

[rebelbuggy]

maybe cause your inbox is Full LOL....

when you think you can get a picture of the bearing carrier?
I broke my swing arm otherday and it busted the bearing carrier also so My buddy welded the swingarm and I got a bolt for swing arm coming from someone else on here and I need a carrier. like to get my 300ex back together.

Thanks

[madmandan11]

how much for cylander head with valves and rockers??

[honda250xrider]

madman which head, stock, race, rec head? also i had hardnerd rockers on 2 of the valve cover's and 1 stock valve cover lol nope pm box isnt full, ill get you the pics here in a few im heading out to the shop now to get the axle off and the carrier off the swingarm.

[rebelbuggy]

Originally posted by honda250xrider
madman which head, stock, race, rec head? also i had hardnerd rockers on 2 of the valve cover's and 1 stock valve cover lol nope pm box isnt full, ill get you the pics here in a few im heading out to the shop now to get the axle off and the carrier off the swingarm.

Oh well I tried to Pm you it said it was full. Um Okay that sounds good. Im bout to head to town but be back in a few.

[enduro400rider]

for your 330 and 295 sleeves do you have the pistons to go with them or is it just the sleeves?

[honda250xrider]

no i do not have the piston for the 330 sleeve, the 330 sleeve is the same as the 295, just the cc difference is in what motor you use it in the 250x would make it out to be 295 legal for the air cooled national class, if you put this is in the 300ex it would make it 330cc. I do however have the piston and jug/sleeve for the 90mm piston. i just cleaned out all of my pm's so everyone should be able to pm me, rebel you have mail

[madmandan11]

the stock head will be fine as long as it all in good running condition all valves etc..rockers also if price is right i have money friday

[honda250xrider]

sorry to say just ended up selling my head with the head cover with the rockers, the only thing i have is the race and the mild ported head, with the head cover and hardened rockers which wouldnt do ya any good without a cam.....

[madmandan11]

you have a cam?

[honda250xrider]

the only cams i have 2 webcam's and also a fst custom grind cam, all of them need hardened rockers to run with the cam.

[honda250xrider]

a better pic of the shocks cleaned up they will come with shock covers also.

[enduro400rider]

ill give you 90 shipped for the pipe

[honda250xrider]

100 shipped and u have a deal

[enduro400rider]

Originally posted by honda250xrider
100 shipped and u have a deal

ok you got it, PM me your address and ill get a MO out tommarow

[lumpy300]

need a new cam and hardened rockers, how much?

[honda250xrider]

150 plus shipping, this is with a web cam grind number 236 valves cover and harnded rockers, or you can get the custom grind cam i had bought from mickey dunlap but you will diff. need to have stiffer springs and would recommend at least a mild port job. and larger valves, with that cam and rockers with the valve cover i'd like to get 200 plus shipping, this was a Custom Grind cam made for my quad.....

[Dan229]

Are the a arms sold?

[honda250xrider]

no there still for sale

[rebelbuggy]

EDIT: I posted in the wrong fourm... I send your M/o yesterday let me know when u ship so i can be looking for it thanks

[Dan229]

Let me know a price for all of these:

Lectron, A arms, oil cooler, race head, CDI

Are the cams for top end only or do they have good low and mid as well? If, I am interested in them as well.

Thanks,

[honda250xrider]

ill take 565 for what you listed and 615 with the custom grind cam. plus shipping just remember with this cam you need to have hardened rockers

[Dan229]

Originally posted by honda250xrider
ill take 565 for what you listed and 615 with the custom grind cam. plus shipping just remember with this cam you need to have hardened rockers

How about $630 shipping included? If that will work, PM your addy and we have a deal.

[honda250xrider]

just to give you guys some idea on really how many parts I have, together i had 3 honda 250's so every stock part or such you can pretty much gather i will have it just let me know what you need.

[honda250xrider]

is the pics of the motors, the closest was my race motor this one includes 90mm piston, 12.7mm stroked crank, hd rod new clutch etc.

[honda250xrider]

still have front shocks, 350 shipped to your door

[rebelbuggy]

you dont happen to have a oil filter cover you want to sell do ya?

[honda250xrider]

sure do, 20 shipped

[300ex_#387]

Oil cap?

[enduro400rider]

you ready to sell that TC yet? you said you had to find another pipe first i wasnt sure if you found one yet, if you havent maby we could work out a deal and i could set you up with my stocker

[Ride300ex]

Do you have a stock bearing carrier in good condition?

[250X_project]

PM is sent about previous dealing....hope parts I wanted aren't sold....

[elementryder]

125 shipped on the pipe if you still have it

[WOLFBITE]

DO U STILL HAVE CAM AND CDI?

[honda250xrider]

only stock cdi and stock regulatoor with several stators

[XCAdam89]

Have a stock Air-Box lid or some kind of cover?? Any Handguards?

[honda250xrider]

yes stock airbox lid i do have. 10 shipped and its yours

[schaefer]

what do you have left?

[250X_project]

Got any stroker cranks? LOL. Do you have the other plug for the stator cover. Mine are all the crappy flat head ones, I liked the allen you sent me. Have the other? Thanks.

-Adam

[honda250xrider]

I have another thread on some other parts that are mostly stock but i can more than likely get you any part that you need that is stock. I have sold quite a few but still have one good stator several cdi regulators sprockets 13,14,15 gasket's just a bunch of extra things.