few questions

[YATES]

I bought a banshee, former race bike....its missing the headlights, and wiring for the headlights, and cdi or coil I belive, but the guy said I can just plug into the harness...does this sound right?

I want to have the swing arm , laegars a arms and frame powder coated....what will need to be replaced(bushing, or anything like that), and will I need any special tools for disassembly?

Thanks for your help

[firefighterjosh]

There is a big diff between the CDI and Coil.

The CDI is located in the rear of the quad next to the seat latch area. YOu can just plug it in.

If you go to the right side of the machine and look under the gas tank is were the Coil is located/ just follow your spark plug wires to it.

You will not need any "special tools" to take apart the swinger and a-arms. Just the basic tools. I would replace all bushings and bearing you come across when taking it apart.

I do have a CDI/ whole wiring harness and a coil for sale if you need it. It came off a good running banshee.