new here

[kidatheart21]

just wondering if anyone can help me? i bought a 95 300ex real cheap. it has some problems. it needs a new bearing carrier(no problem) but the guy who had it took off the rear brakes and totaling screwed the rear end set up. i need a diagram or pic on how the axle should be set up. like i need the piece that hold the rear sprocket on. whats that called? if anyone can get me a part list and pic that would be great. thanks everyone,and great site guy's.:confused:

[eldoexrider01]

well i do know that the caliper is on the top of the disk on back and runs a brake line from it to the foot brake assy. ur best bet is to buy a shop manual for your bike. it shows assy. and dis-assy. and u can find the name of the part and find one at a local shop or on the computer.

[Woodsrider]

try Service Honda, they have a parts fich. I think this is the link to the veiw you need. if not you can find it from this link.
300EX rear axel view (http://www.servicehonda.com/HARD%20PARTS/ATV/TRX300EX_93_01/trx300ex%20frames%20page.htm)

[Ex'r Marlin]

Originally posted by kidatheart21
i need a diagram or pic on how the axle should be set up. like i need the piece that hold the rear sprocket on. whats that called? I could be wrong... But I think the part you are asking about is the sprocket hub. My experience with this "sprocket hub" is that it comes fixed on the axle. This means if you need a new one... You will need to get the whole axle. :confused: :(

[mxracer08]

i know that my lonestar has a circlip on the outside of the sprocket hub so you can take it off, but i'm not sure of the stock one

[timewass]

Check this out.
Click here (http://216.37.204.203/honda_OEM/HondaATV.asp?Type=13&A=24&B=40)

[QuadFixer]

how cheap?