300ex parting out, lots aftermarket

[pistonbone]

Well, I seized the topend of my motor and I�m kinda tight on money. I was going to rebuild it but winter is coming, time for sled parts and my truck needs a little attention before it turns to a pos. I�d like to get something bigger in spring as well. All these prices are just kind of thrown out there and you are welcome to make an offer on everything and package prices, too. If something is not priced, offer. Prices are not shipped. Shipping via standard USPS. So here�s a list of what I got. The chassis is based from a �87 250x with a �95 300ex motor. I'd like a few things spoken for before I commit to this. Paypal preferred. Handguards and pegs not for sale.
Here is what I have left folks:

Front Honda wheels with Bandit ATs 22x7x10 - ?
Front white 250r Maier racecut (painted black, gas tank cover tabs are cutoff for a cleaner look ontop of a 300ex) - ?
400ex shocks - $60
300ex-400ex shock bracket - $80
Helmet skin (see picture) - $10 shipped



I also have a gas tank from an �84 Yamaha SRV - $30
$5 for stripping paint.
Pictures:

http://img114.imageshack.us/img114/9602/picture055qs5.th.jpg (http://img114.imageshack.us/my.php?image=picture055qs5.jpg)
http://img114.imageshack.us/img114/4097/picture060hd9.th.jpg (http://img114.imageshack.us/my.php?image=picture060hd9.jpg)
http://img114.imageshack.us/img114/9936/picture061mg4.th.jpg (http://img114.imageshack.us/my.php?image=picture061mg4.jpg)
http://img114.imageshack.us/img114/884/picture062ve6.th.jpg (http://img114.imageshack.us/my.php?image=picture062ve6.jpg)
http://img114.imageshack.us/img114/6759/picture063ac4.th.jpg (http://img114.imageshack.us/my.php?image=picture063ac4.jpg)
http://img114.imageshack.us/img114/350/picture064bu2.th.jpg (http://img114.imageshack.us/my.php?image=picture064bu2.jpg)
http://img114.imageshack.us/img114/5214/picture065bi4.th.jpg (http://img114.imageshack.us/my.php?image=picture065bi4.jpg)
http://img114.imageshack.us/img114/8250/picture066qu9.th.jpg (http://img114.imageshack.us/my.php?image=picture066qu9.jpg)
http://img114.imageshack.us/img114/2121/picture067qw2.th.jpg (http://img114.imageshack.us/my.php?image=picture067qw2.jpg)
http://img114.imageshack.us/img114/7043/picture068vv6.th.jpg (http://img114.imageshack.us/my.php?image=picture068vv6.jpg)
http://img114.imageshack.us/img114/1672/picture069sy5.th.jpg (http://img114.imageshack.us/my.php?image=picture069sy5.jpg)
http://img114.imageshack.us/img114/4186/picture070mn5.th.jpg (http://img114.imageshack.us/my.php?image=picture070mn5.jpg)
http://img114.imageshack.us/img114/5379/picture071pm2.th.jpg (http://img114.imageshack.us/my.php?image=picture071pm2.jpg)
http://img114.imageshack.us/img114/7581/picture072lv0.th.jpg (http://img114.imageshack.us/my.php?image=picture072lv0.jpg)
http://img114.imageshack.us/img114/1933/picture073qa1.th.jpg (http://img114.imageshack.us/my.php?image=picture073qa1.jpg)
http://img114.imageshack.us/img114/6284/picture074qi1.th.jpg (http://img114.imageshack.us/my.php?image=picture074qi1.jpg)
http://img114.imageshack.us/img114/1968/picture075sa9.th.jpg (http://img114.imageshack.us/my.php?image=picture075sa9.jpg)

[enduro400rider]

does the valve cover have the heavy duty rockers? if it does what kind of deal can you give me on the cover and cam? i might be interested in a few parts if you can give me a package deal

[pistonbone]

package deals are cool
I'm not sure if it has the hd rockers, I got it from a guy in TX who was a tool, but if you can tell me how to check the difference, that would work for me and I'll go out and check right now.

[enduro400rider]

im not too sure how to tell if they are HD, i only know that your supposed to run HD rockers with a web cam. but i figure if the head worked fine for you than they are probably HD and if they arnt then they probably arnt really needed. anyway here is the list of parts im interested in just let me know how much you want for them all with shipping to 44418 ohio

Renthal bars
Web cam
grab bar
UNI

give me a price on those, i might want more. but that should do for now

[pistonbone]

pm sent

[Tlongs400]

pm sent to u

[AtvMxRider]

What kind of shape is the axle in?

[pistonbone]

Originally posted by AtvMxRider
What kind of shape is the axle in?

it could be polished up, the writing is wearing off, but it is in good working condition

[duke416ex]

price on the rear hubs?

[pistonbone]

pm sent

[Family Guy]

What kind of condition is the bottom end in? Cracks,leaks? Tranny condition?

[JJ69]

rear bearing carrier, full pipe and locknut?
price/ ship to canada?

[pistonbone]

bottom end is great condition, does need a new copper washer though lol, I lost it in the driveway somewhere last oil change.
no cracks, no leaks, tranny was great
last ridden in I think late June or early July.
shifters are painted black as well as starter gear cover, starter is good too
there's a couple tiny pieces of sleeve in it so must be flushed good before installing topend, then ride around the driveway and change oil, and repeat if you desire after another short ride

that's about all the info I can give you on the bottom

[pistonbone]

Originally posted by JJ69
rear bearing carrier, full pipe and locknut?
price/ ship to canada?

carrier might need bearings, not sure, it was good last ride but sounds like some crap got in there since i've been moving it around the garage so maybe just needs grease.... might be a lonestar carrier, never had it out and came with swinger, I'll check but no price difference.

$230 shipped

[pistonbone]

bearings are perfect, no noise, just my brake pads making noise, or lack of brake pads

[JJ69]

what kind of pipe is it? will it work on a 250x?
i think the carrier would be the same as a 250x as well..?

[pistonbone]

Originally posted by JJ69
what kind of pipe is it? will it work on a 250x?
i think the carrier would be the same as a 250x as well..?

they will work on the x
it's a full DG Krome exhaust system, chrome, the carrier is a standard carrier with good bearings and seals, won't be disappointed in the products you asked for

[300ex_#387]

Can you go any lower on that swingarm? I would be interested in a package deal on that and the axle.

[pistonbone]

Originally posted by 300ex_#387
Can you go any lower on that swingarm? I would be interested in a package deal on that and the axle.

$450 shipped for those
I paid $500 for the swinger late last year and it hasn't gotten much time since, it's also greasable so the pivot bar won't seize unless you forget about it
the swinger alone new is like $700 or something ridiculous and the axle is $400 new
so... let me know eh

[300ex_#387]

Originally posted by pistonbone
$450 shipped for those
I paid $500 for the swinger late last year and it hasn't gotten much time since, it's also greasable so the pivot bar won't seize unless you forget about it
the swinger alone new is like $700 or something ridiculous and the axle is $400 new
so... let me know eh

Let me look around and see if I can't find anything cheaper, and i will get back to you in a couple of weeks.

[yfz450inMI]

PM me a package deal price for the following:

DG full exhaust
250R a-arms
400ex shocks
300ex/400ex shock bracket
2001 Rappy shock

I'm in Michigan also - just the lower peninsula.

[paintfumes]

Pm me a price on the exhaust, clutch lever with perch, rear hubs and brake lever shipped to 44134.

[pistonbone]

edited, these things still for sale

[hon400ex]

can i get a price on the tires and rims, both front and rear?

[YZ120]

length of the 400 ex shocks (eye to eye) and a price.
thanx

[pistonbone]

Originally posted by hon400ex
can i get a price on the tires and rims, both front and rear?

$115 shipped?


Originally posted by YZ120
length of the 400 ex shocks (eye to eye) and a price.
thanx

16 1/4"
$75 shipped?

[pistonbone]

dasanii19 wrote on 10-01-2006 05:39 PM:
Do you have the start/kill switch for the 300ex?


no

Your mailbox is full.

[300ex_#387]

Just letting you know that you will get your money for the swingarm and axle at the end of the week. Your PM box is full. Send me your paypal address and I can get you your money on friday.

[300ex_#387]

Paypal SENT! for LSR swingarm, and LSR axle. Thanks again.

[enduro400rider]

looks like i want some more parts, how much for the beadlocks?

[pistonbone]

Originally posted by enduro400rider
looks like i want some more parts, how much for the beadlocks?

$75 shipped

[enduro400rider]

Originally posted by pistonbone
$75 shipped

is that with or with out the tires?

[Caseys 300ex]

Whats the lowest you would go on the shock relocator?

[pistonbone]

Originally posted by enduro400rider
is that with or with out the tires?

with

[pistonbone]

Originally posted by Caseys 300ex
Whats the lowest you would go on the shock relocator?

+$5 for shipping, it has only been mounted and never ridden on

[enduro400rider]

Originally posted by pistonbone
with

ok ill take them, could you hold them till friday? ill send a MO out friday once i cash my check

[pistonbone]

Originally posted by enduro400rider
ok ill take them, could you hold them till friday? ill send a MO out friday once i cash my check

ok

[enduro400rider]

im thinkin about getting the raptor rear shock too, how much differance can you tell between the stocker and the raptor shock? is it any firmer than stock?

[pistonbone]

Originally posted by enduro400rider
im thinkin about getting the raptor rear shock too, how much differance can you tell between the stocker and the raptor shock? is it any firmer than stock?

big difference, smoother, better performance, firmer, bigger jumps, doesn't fade like a shock without a rezzie just overall a better shock and cheaper than a works or elka

going from my fairly built 300 to my girlfriend's stock 250x is really crappy suspension wise, seems like the raptor shock just absorbs all the bumps and stock shock bounces you around
I'm 200 lbs. and it was a great improvement

$170 shipped for rear tires/rims and shock.

[enduro400rider]

could you do 160 shipped on the wheels and shock?

[pistonbone]

Originally posted by enduro400rider
could you do 160 shipped on the wheels and shock?

$165 shipped. It'll be a big and somewhat heavy box. Too bad you didn't want it all at once, could've gotten a great deal.

[enduro400rider]

Originally posted by pistonbone
$165 shipped. It'll be a big and somewhat heavy box. Too bad you didn't want it all at once, could've gotten a great deal.

alright 165 shipped, ill try to get that MO out friday, i think i deleted your address so you will have to PM me it again

[pistonbone]

updated

[300ex_#387]

Received axle, and swingarm. Good doing buisness with you.

[pistonbone]

updated

[pistonbone]

ttt

[pistonbone]

Please, read the list!
Please, look at the pictures!
Everything for sale is listed!

[pistonbone]

updated

[Lonestar_R]

Do you still have the axle, swingarm, and the rear shock, how much for each

[pistonbone]

Originally posted by Lonestar_R
Do you still have the axle, swingarm, and the rear shock, how much for each

Just curious, did you read my post?

[Lonestar_R]

Sorry dude.....but you had pics of it......no need to get all defensive and mad.....sometimes people forget to list the stuff.......I have had a post up for like 4 months and to this day people ask me for stuff I never even listed or implied I had......I guess it does hurt to ask

[pistonbone]

Originally posted by Lonestar_R
Sorry dude.....but you had pics of it......no need to get all defensive and mad.....sometimes people forget to list the stuff.......I have had a post up for like 4 months and to this day people ask me for stuff I never even listed or implied I had......I guess it does hurt to ask

No one said I was mad. It's just annoying to get 5 different replies/PMs asking what I have left.
There was no offense intended, but I do think people should read the list in every thread.

[schaefer]

shockbracket made by-?, battery tray- pics please, wiring harness, starter, battery, any 300ex rear plastic? pm also sent but forgot the shock bracket. shipped price

[pistonbone]

Originally posted by schaefer
shockbracket made by-?, battery tray- pics please, wiring harness, starter, battery, any 300ex rear plastic? pm also sent but forgot the shock bracket. shipped price

pm sent, thanks

[cynet2k]

Do you still have the gas tank? Does it have any leaks or cracks or problems? and What you looking to get for it shipped to

NJ, 08037

Thanks

[cynet2k]

Do you still have the gas tank? Does it have any leaks or cracks or problems? and What you looking to get for it shipped to

NJ, 08037

Thanks

[pistonbone]

Originally posted by cynet2k
Do you still have the gas tank? Does it have any leaks or cracks or problems? and What you looking to get for it shipped to

NJ, 08037

Thanks

It's perfect, $100 shipped.
Bolt it on and run it with no problems (includes petcock).

[DizzyDude]

need a package deal on bottom end and cylinder, rear brake lever,hoses/cylinder and all the air box stuff shipped to 28086

Thanks for any info in advance.

[pistonbone]

Updated, that list of parts is what I have left. Nothing else.

[Lonestar_R]

do you still have the antifade nut. If so what the bottom dollar shipped? And do you accept paypal?

[pistonbone]

$75 shipped, that's a **** of a deal. Just for comparison look at what a brand new one costs.
paypal to pistonbone@gmail.com

[Lonestar_R]

I have one question about it. does it have studs to mount the rotor like the original brake hub? or does it use bolts? if it uses bolts are they included? either way I'm going to paypal you the money now.

[Lonestar_R]

Payment Sent For the Anti Fade

[pistonbone]

thanks, will ship as soon as possible

[dunny_mark]

I was wondering if you had the front fender extensions? And if so How much? Thanx

[pistonbone]

Originally posted by Lonestar_R
Payment Sent For the Anti Fade

shipped yesterday



extensions are gone, sorry

[Lonestar_R]

Dude you only sent me half of the the antifade nut. Whats up with that? I need the rest of it to work.

[pistonbone]

pm sent, it's what you paid for, if you didn't want that, then i don't know what to tell you. if you don't want it, sell it.
I sold it to you how I got it and how I installed it.

You are welcome to leave me bad feedback if you feel it is necessary, however I've sold everything as is and everyone else got what they paid for and I'm happy to say no one until you has anything but a bad experience. I'm sorry you are not happy but it is not because I sold you the wrong item.

[Lonestar_R]

this cannot be how you installed it. The threads are not the same as the stock nut so you can't put this on it. I will post a pic tonight of what you sent me and it is not what I paid for. I only got half of the nut. Everyone will see that the coller and the brake hub is not included and should be if you are selling an anti fade nut. I will send this back if you do not have the rest of it and will not send it to me and I want my money back. I might as well of flushed 75 bucks down the toliet than to purchase this from you if you don't not want to work something out.

[pistonbone]

i have a better idea, pm sent

[enduro400rider]

whats your bottom dollar on the shock re-locator.. they are going for around 40-50 on ebay now a days, so im hopping you would go lower than 80

[pistonbone]

http://www.diamondjcustoms.com/new/shock/honda/trx300ex-250x-slk.htm

I will sell mine, which is this one, for $80 shipped since they are listed at $110 shipped. Mine has only been mounted and unmounted.

[pistonbone]

updated, and i will trade full or partially for a needed gray 250x front right fender or the entire front pastics

[honda4life72]

how much for shocks? and how long are they eye to eye?

[pistonbone]

$70 shipped to 48
they are i think 16.25", whatever 400ex shocks are. it says on this site