PDA

View Full Version : 400EX vs Z400



Reggie44
09-19-2006, 06:47 PM
What mods can make a 400ex run with a Suzuiki Z400. I have the K&N, white bros slip on, and rejetted to a 152, and there still leaving me....What's next???

slvrlakerdr08
09-19-2006, 07:17 PM
go for a rev box and a web cam

downeyballz
09-19-2006, 07:21 PM
learn to ride better
change your sprocket
get a 11:1 piston

400eXr1d3rZ
09-19-2006, 07:24 PM
First things first, you need TRACTION get some razr II's or holeshots. After that if you have the money, big bore kit. JE or weisco 10:1 piston, hotcam stg2, cometic gaskets kit, you will blow past a z400, and 14t front sprocket.

2muchquad
09-20-2006, 11:14 AM
I have the K&N, white bros slip on, and rejetted to a 152, and there still leaving me....What's next???

Turn off your quad and get on the back with your buddy on his z400.There he wont leave you anymore..sorry i couldnt resist.
I assuming hes leaving you in a straight up drag race?A good rider should be able to keep pace with a z400 or even a 450 in the trails.While almost all slip ons will flow more than stock,on any aftermarket system the headpipe is where you make your money.If your looking for cheap mods try that if you dont want to open up the motor and do a cam and high compression piston swap. ;) Try a rev box as well

Toadz400
09-20-2006, 01:14 PM
Are you losing that badly to a Z400? A simple pipe should be able to make a 400EX beat a Z400 in a drag race. On the trails you should have no problem keeping up with and beating a Z400 as long as you are a decent rider. There isn't much difference between the two performance wise.

400ex is money$
09-20-2006, 03:40 PM
get a 36 tooth rear sprocket u will blow it out of the water

2muchquad
09-20-2006, 10:02 PM
get a 36 tooth rear sprocket u will blow it out of the water

No you wont.If it was only that easy.With gearing changes theres always a tradeoff,accelleration or top speed.You may get more on the top end but your buddy will be shifting gears pulling away while your waiting for your bike to hit the sweet spot in the powerband so you can shift.Theres no free lunch:(

firefighterjosh
09-20-2006, 10:22 PM
I have a 416 kit and I am about the same as a Yosh Piped KFX 400.m I do have more tourq I noticed

krt400ex
09-21-2006, 12:24 PM
is ur buddies bike stock? i was riding with a guy that had piped z and i was topped out, but he still had another whole gear. if there r anymods done to the other bikes u will need to look into a big bore kit to keep up with them.

cals400ex
09-21-2006, 11:04 PM
best mod for the money (free)..............make sure your throttle cable is adjusted properly. it can make a huge difference if there is too much slack in it because the carb won't be opening up all the way.

Reggie44
09-22-2006, 05:56 PM
Thanks for all the input, sounds like I need to open up the engine. Kawasaki is supposed to put out their new 450 this weekend. The dealer said it might have reverse????

exrider008
09-22-2006, 06:06 PM
Originally posted by cals400ex
best mod for the money (free)..............make sure your throttle cable is adjusted properly. it can make a huge difference if there is too much slack in it because the carb won't be opening up all the way.

thats very true if u have alot of slack adjust it. my friend has a 04 rubicon 500 and we adjusted his throttle and got 5+mph:huh

02400exer
09-22-2006, 06:40 PM
you should be able to beat stock z400 with a pipe and jet it i smoke the stock ones and i got 11:1 weisco rev box pipe jetted k&n air filter and especially on the trails cuz z's got less swingarm ground clearence so they get hung up tree limbs or what evers on the ground