PDA

View Full Version : parting out 250R



TheLadiesMan
09-18-2006, 10:57 AM
THESE ARE NOT SHIPPED PRICES


Frame- stock 86 gusseted, I had it crack by lower motor mount, welded it and haven’t had a problem since 2 rear bumper mounts are drilled out. $350

a arms- leager +2 standard mount, 2 brand new ball joints and 2 low hour balljoints SOLD

swingarm- leagers -1 $275

stock airbox with ring and uni filter $50

2006 450R front rims/tires 4 hours of riding $120

2006 450R rear rims/tires 4 hours of riding $150

steering stem- stock welded $25

complete 250R ignition cdi, stator, flywheel, wiring, regulator SOLD!!

axle- RPM dominator +2 +2 , slight wobble SOLD

stock carrier- bearing seemed good $30

Rear shock- custom axis with adjustable compression 160lb rider, rebuilt 2 years ago with LOW hours $350

Rotors- stock fronts and rear looks aftermarket $45

Spindles/ front- stock $75

Spindles/ rear- stock some studes are banged up $ 35

Rear brake assembly- wiht ss line and brake block off, pads are good, PENDING

ENGINE:
Cylinder/ Head- ESR 330 ported by neil, (MID/TOP) set up for a +4mm stroker, will need to be bored(2nd). Set up for race gas $800

Crank- low hour ESR +4mm $ 275

Carb- 40.5 ESR gas carb $150

Silencer- turbine core2 sold

reeds- V-force2 good shape $45

Plastic- silver Maier race cut with Duncan graphics with seat $250

http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2992.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2993.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2994.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2995.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2996.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2997.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2998.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_2999.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3000.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3001.JPG


http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/OEM%20plastics.jpg
OEM plastics without seat $35
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/bills.jpg
bills pipe and no name silencer $20
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/bumper.jpg
no name bumper $15

TheLadiesMan
09-18-2006, 10:58 AM
radiator $290.
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3070.JPG
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3071.JPG

other silencer not a sparky i put the sticket on there
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3072.JPG

TheLadiesMan
09-18-2006, 09:03 PM
TTT

TheLadiesMan
09-19-2006, 10:46 AM
better pic of the RPM DOMINATOR axle, i took it all out of the carrier today and set it on my counter top (figured it would be the flattest area around) i couldn't see where it was bent at, so i think the wobble was in the carrier bearings. $225
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3134.JPG
aftermarket rear rotor, and holder for the axle.
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3135.JPG



some more parts forsale!!!!!
foot pegs $20
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3136.JPG

Motor mounts $10
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3137.JPG

rear linkage $15 this is the longer one that makes your quad sit lower
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3138.JPG

stainless steel radiator lines with ESR temp gauge. the temp gauge was used for one ride $75
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3139.JPG

exhaust hanger/mounts SOLD
http://72.29.68.184/~despera/250R%20mtor%20forsale/350R%20parts/100_3140.JPG

TheLadiesMan
09-20-2006, 08:11 AM
TTT

ZSK
09-20-2006, 09:10 AM
Where are you at in MI?

TheLadiesMan
09-20-2006, 09:27 AM
Originally posted by ZSK
Where are you at in MI?

you got PM

TheLadiesMan
09-20-2006, 09:40 AM
Sunday night what doesn't sell here will be on e-bay. :cool:

TheLadiesMan
09-20-2006, 02:26 PM
n/m tomorrow afternoon these will be on E-bay. buy them now bf there open to everyone.


thanks

TheLadiesMan
09-20-2006, 07:24 PM
TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT TTTTTTTTTTTT

anything anyone wants b4 they go to e-bay?

TheLadiesMan
09-21-2006, 08:05 AM
couple more hours and parts will be on E-bay, sure there isn't something you want to grab now?

radiator
swingarm
plastics
ETC......