elkablaster94
09-17-2006, 07:36 PM
Heres the deal; I've been trying to sell the bike as a whole for nearly a year to no avail, so I guess my only choice is to put it on the chopping block and see what I can get for it. The frame is a 2003 and was bought brand new, and the rest of the bike is basically aftermarket with one season on it. Prices may be negotiable within reason, and shipping is NOT included. Please e-mail me at tyejac3@aol.com for pictures of the items listed.
Part Out:
Motor: Robbs Racing Engines 200cc National Motor (Airsal Cylinder w/ Robbs porting, Shaved Head, Hot Rodz crank, Timing advance key, Boyeson reeds, pro Design intake modified to fit 34mm carb) $700
34mm PJ Carb, NOT a 250R part, this carb was modified by Sudoco to run with the blaster engine, does not require a boost bottle like most "mocked up" setups using this carb. Set up for a thumb throttle. $150
LRD RFX Pipe and Silencer, Chrome pipe with a black ceramic silencer, includes all springs and the flange. $225
Motor package (All above listed merchandise, will also include the trenga air boot to adapt the bigger carb)$1000
Chassis Parts:
Elka Dual Rate front shocks, SSD with rezzies $500
Elka Single Rate Rear Shock, SSD with Comp/Rebound adj. $500
Burgard +2+1 Chrome A-arms w/ tie rods and ball joints $300
Burgard +2 Chrome steering stem $150
Lonestar +4 Axle $250
RAD Bearing Carrier $50
Extreme Pro-Peg Nerf Bars $150
Wheels/ Tires:
OMF Ringed Race wheels w/ 20x6x10 Raz'r tires 80% $200
OMF Ringed Race wheels 2/ 18X9.5X8 Turf Tamers 50% $100
Stock Parts are also available ifyou need it I probably have it. I would like to secure a buyer on the motor prior to letting anything else go, as chassis parts seem to be in much higher demand on the blaster. If you have any questions dont hesitate to shoot me an e-mail.
Part Out:
Motor: Robbs Racing Engines 200cc National Motor (Airsal Cylinder w/ Robbs porting, Shaved Head, Hot Rodz crank, Timing advance key, Boyeson reeds, pro Design intake modified to fit 34mm carb) $700
34mm PJ Carb, NOT a 250R part, this carb was modified by Sudoco to run with the blaster engine, does not require a boost bottle like most "mocked up" setups using this carb. Set up for a thumb throttle. $150
LRD RFX Pipe and Silencer, Chrome pipe with a black ceramic silencer, includes all springs and the flange. $225
Motor package (All above listed merchandise, will also include the trenga air boot to adapt the bigger carb)$1000
Chassis Parts:
Elka Dual Rate front shocks, SSD with rezzies $500
Elka Single Rate Rear Shock, SSD with Comp/Rebound adj. $500
Burgard +2+1 Chrome A-arms w/ tie rods and ball joints $300
Burgard +2 Chrome steering stem $150
Lonestar +4 Axle $250
RAD Bearing Carrier $50
Extreme Pro-Peg Nerf Bars $150
Wheels/ Tires:
OMF Ringed Race wheels w/ 20x6x10 Raz'r tires 80% $200
OMF Ringed Race wheels 2/ 18X9.5X8 Turf Tamers 50% $100
Stock Parts are also available ifyou need it I probably have it. I would like to secure a buyer on the motor prior to letting anything else go, as chassis parts seem to be in much higher demand on the blaster. If you have any questions dont hesitate to shoot me an e-mail.