Log in

View Full Version : problem with blaster!!



Xater
09-16-2006, 09:32 AM
when i went riding today i noticed after 10 mins of riding my motor was sputtering so i stoped and noticed gas was pouring out of all three over flows on the carb!! i turned the gas of and rode home with the gas off. i took apart the carb and i seemed like everything was working proberly. any ideas???

thanks

400eXr1d3rZ
09-16-2006, 10:20 AM
Stuck float, clean the bowl.

Xater
09-16-2006, 10:36 AM
my floats have been stuck for a year but that never happend

400eXr1d3rZ
09-16-2006, 11:15 AM
Well, thats what happens when your float is stuck, it allows the bowl to overflow with gas, and then it rushes out the overflow tubes.

Xater
09-16-2006, 11:43 AM
yeah thats probly what heppend because it would just drip out of the the main overflow tube because my floats dont float very good... it was probly stuck open all the way.

blaster_faster
09-20-2006, 06:00 AM
this is what i would do take your carb off than take every thing off inculding every screw and lay them out and spray carb cleaner on every thing and in every hole and that should work that happned to my carb before

Xater
09-20-2006, 04:44 PM
nvm i ditched that carb and bought a 30mm carb today.

660Grizz04
09-20-2006, 08:11 PM
How much for the 30MM ?

Xater
09-21-2006, 01:24 PM
http://www.trengaracing.com/catalog/product_info.php?cPath=41_25&products_id=231

here grizzly

im sorry if this is considered advertising.