Need Some Help...

[troyleepred719]

I NEED SOME HELP FELLAS, I WANT TO KNOW, IS THERE ANYWAY I CAN PUT BARS ON MY WHEELER, WITHOUT CHANGING THE KEY/LIGHT SETUP AND NOT REPLACING THE CLAMPS.........ALSO, ANYONE GOT ANY BARS/ PARTS THEY WANT TO GET RID OF CHEAP, I STILL NEED A BUMPER, I HAVE JUS STARTED RACING AND AM TRYING TO GIVE THE PRED A NAME IN THE AM WORLD........ALL YOU HELP IS APPRECIATED, #343 JOSH

[katch26]

you shouldnt have any problems replacing just the bars as long as you stay with 7/8 bars. All the replacement clamps are for going to an oversize (1 1/8) bar. Just luck bro.

[waloud]

I would recommend going to oversize bars. When you start looking to move the key pad, it's hard to find a clamp to replace that has all of the holes for your lights. I went with Renthal bars, which I like, but you don't have much room to play with when it comes to the factory key pad.

[wolffie]

by the time you strip everything off, change the bars, and blah blah, you might as well just buy a clamp kit as well. fat bars are way stronger, and buying a clamp kit that holds all the icons in place looks clean.

www.hpd-inc.com sells their "power max" clamp for $80 (thats what i got) and trail tech sells theirs for like 70-80 on www.rockymountainatv.com check those out.

heres a lil tip too; MOST people like the feel of taller bars and or risers. IF you get a clamp kit, first, bolt your stock clamp on the bars and then bolt the clamp kit on top of it. its kind of a ghetto riser technique but it works. thats what i did and am pretty happy with it.;)

[Scotty7304]

I just replaced my bars last weekend. I went with stock because they are only $40