team_450_88
09-12-2006, 09:58 PM
!!04 trx450r !! Good Shape, Very Sharp Bike, Check out the pics. low hours on motor...
Elka Front shocks (comp adj.)
Elka rear shock (comp and rebound adj.)
( have been serviced recently)
Elka 1st Generation Linkage
Herrmann Racing a-arms (red)
Maxxis Razr mx tires all the way around (good tread)
Douglas Ultimate frt rims
Champion Beadlock rear rims
Ac ProPeg Nerfs with heelguards
Ac grab bar
Ac bumper
Pro Design Kill Switch
Powermadd Handguards
Renthal Fat Bars with the Mounts
Billet Gas cap
Uni filter
Lonestar axle
Lonestar sprocket hub
Renthal Frt Sprocket 13th
D.I.D Chain
east coast atv gripper seat cover
Hmf Full Exhaust (polished)
crf450 dirtbike clutch with hotstart
Maier scooped hood
Frame is pc'ed Black
I also Have an Hour Meter on the bike
Probably forgot some things but thats the main stuff
Motor..
Motor is fresh, low hours on all the parts listed below!! It got redone from the crank up. Built by Calvin Baker (fullbore racing) VERY FAST MOTOR!!
Hotcam Stage 2(around 20 hours)
JE 13:5:1 Piston (around 20 hours)
recently replaced exhaust & intake valves
recently replaced cyclinder
recently replaced crank
recently replaced rod
everything was redone...
$5,100
If you have any questions you can call me at 731-431-2461 or 731-427-0401 or email me at jocfuelsales@aol.com!! Thanks
Ryan
Elka Front shocks (comp adj.)
Elka rear shock (comp and rebound adj.)
( have been serviced recently)
Elka 1st Generation Linkage
Herrmann Racing a-arms (red)
Maxxis Razr mx tires all the way around (good tread)
Douglas Ultimate frt rims
Champion Beadlock rear rims
Ac ProPeg Nerfs with heelguards
Ac grab bar
Ac bumper
Pro Design Kill Switch
Powermadd Handguards
Renthal Fat Bars with the Mounts
Billet Gas cap
Uni filter
Lonestar axle
Lonestar sprocket hub
Renthal Frt Sprocket 13th
D.I.D Chain
east coast atv gripper seat cover
Hmf Full Exhaust (polished)
crf450 dirtbike clutch with hotstart
Maier scooped hood
Frame is pc'ed Black
I also Have an Hour Meter on the bike
Probably forgot some things but thats the main stuff
Motor..
Motor is fresh, low hours on all the parts listed below!! It got redone from the crank up. Built by Calvin Baker (fullbore racing) VERY FAST MOTOR!!
Hotcam Stage 2(around 20 hours)
JE 13:5:1 Piston (around 20 hours)
recently replaced exhaust & intake valves
recently replaced cyclinder
recently replaced crank
recently replaced rod
everything was redone...
$5,100
If you have any questions you can call me at 731-431-2461 or 731-427-0401 or email me at jocfuelsales@aol.com!! Thanks
Ryan