RezoD
09-12-2006, 07:30 PM
My quad has +2 arms, and a +4 axle, which really helps with stability, but I'd like to lower it a bit, but NOT lose suspension travel. I have Works w/res's up front, and a stocker in back. Is there any adjustment with the works? What about bleeding some of the Nitrogen out of the res's to lower it, and crank the rear down a bit? I'm looking for a rough ride height of a MX quad.
Edit: What I mean by losing suspension travel is, I don't want to lose my usable suspension travel. I know I can buy a lowering kit, but that's that much less droop my suspension will have, and that much less compression it will have (because of the quad bottoming out before the shocks bumpstops kick in). I want the same stroke and travel my suspension has now, I just want it to sit lower.
Travis
Edit: What I mean by losing suspension travel is, I don't want to lose my usable suspension travel. I know I can buy a lowering kit, but that's that much less droop my suspension will have, and that much less compression it will have (because of the quad bottoming out before the shocks bumpstops kick in). I want the same stroke and travel my suspension has now, I just want it to sit lower.
Travis