'87 mx ready 250r! FOR TRADE L@@k!!! TONS OF MODS!

[300excrazy98]

'87 mx 250r! FOR TRADE L@@k!!!
Hey guys i am looking to trade my 250r for something else. I really want a 4 stroke, would really really want to trade for a 450 or some sort, 450r yfz etc or another quad and a dirtbike...

Any way,

Its a 1987 295r

Its got...

PEP triple rate front shocks
Pep Neopream shock covers
Maier Plastics (black) race cut front + back
Nacs Graphics
Nacs Seat cover
Renthal CR HIGH bend bars
Pro Design Kill switch (tether)
Motion Pro Billet twist throttle
Renthal Full diamond grips
LSR steel braided front brake lines (black)
LRD Ignition
Brand new OEM coil + cap
Bills header (painted high temp flat black)
LRD silencer
LAEGER +1.25 Swingarm
Armadillo .25in thick swingarm skid plate
LSR adjustable axle +2+4
LSR billet carrier
Graydon Nerfs
yz clutch lever and perch
AC bumper
aluminium exhaust flange (oring style)
aluminium Air scoops
Baldwin case saver
Nacs parking brake block off
Nacs snorkel block off

ENGINE-

Bored to 295 by Duncan
Cases bored for a 340 by duncan
MX port and polish by duncan
Cometic Gaskets
Keihin 38mm PJ carb
K&N filter with outerwear
Boysen Rad valve
New reeds (Boysen PRO SERIES)
Pro-X piston
Hot rods Crank
YUKON HD GEARS
Hinson clutch basket

all bearings, seals and gaskets are brand new, quad was disassembled, then reassembled by duncan with all parts in engine!!!

Tires-

9 in. HIPERS with RAZR 2s on back
Douglas red labels with fast trekkers up front

I know i am forgetting things...

The frame however does have some welds on it, re-enforcing welds, and also the previous owner had atempted to weld a gusset on the swinger for the chain slider, and let me tell you it is NOT pretty at all, hasnt ruined it, it just looks like crap...

IF you have any ?s please post here or email me at bxkid53@aol.com and i will try to get back to you asap!

This quad is located in MONTVILLE, NJ 07045

Thank you for looking! I will try to get pics up ASAP!!!

Here is a pic, before the bars, grips, rims tires, skid plate, and some other things, thats what it basicly looks like right now. minus those things listed above.

ALSO HAVE ANOTHER SET OF RED PLASTIC TO GO ALONG WITH THE QUAD.

[300excrazy98]

bump open to offer

[Raptorman660]

03 raptor lim ed with full skid plate and ac nerfs and ac front bumper

[300excrazy98]

no thanks

[dc245]

pm sent

[brapbrap13]

416ex?

[300excrazy98]

Originally posted by brapbrap13
416ex?

What does it have?

[300excrazy98]

oh well about the 416...

BUMP!!!

[300excrazy98]

TTT

[redracing88]

400ex? hindle exhaust brand new itp gncc tires renthal bars kn filter all round shock wears brand new clutch i mean brand new not used yet all new gaskets by clutch nerfs. the bike is mint its an 02

[300excrazy98]

no thanks

[yamahamx14]

trade for an 05 YZ 125 full fmf exhaust, one industries graphics, and full factory connection suspension you might have seen it rippin ur *** down the powerlines everytime you go ridin

[dirtwarriors]

trade for a truck or two ?

[300excrazy98]

Originally posted by dirtwarriors
trade for a truck or two ?

what kind? have any pics?


jamie i would trade you!

[300excrazy98]

here is a pic of the new reeds! bump!!

[450rcrazy022692]

Hi.... I took this quad from my friend Christian for 3500. I rode it and its fast as hell. Im sending this quad to my very good friend Paul Turner. He is going to freshen up the engine quite a bit. a little more porting, another new set of the yukon hd gears, all new gaskets, piston, rings etc., new sleeve, rebuild crank, all new bearings, and seals. new hinson clutch... he is charging me around 2300 from him to do so. "I" am looking to sell it now, because there really is no use for it when i have a full baldwin engine comeing soon for my 450 and i need money to keep on adding parts on it.

Thank You
Frank

Make an offer.... im not looking to trade unless a 450 or a very worked 400ex