how to get out stripped allan screw

[400eXr1d3rZ]

Yesterday I tried to take my side panels off, I all the little rivit pin things out easily, then i went to go get the allan screws out. The left was hard to get out but I got it out without stripping it. The right one wouldn't move, and it got stripped. How do I get it out?

[firefighterjosh]

Get a pair of vice grips around it.
Take a Flat head screw driver put it on the side point left and hit it with a hammer and try to spin it.
Pound a bigger allen into it.
Cut a slice in it with a dremel and put a flat head on it.
Drill it out.

Just some ideas

[SANDFANATIC]

Get one of these. Any of these will help you. They all do the same thing.

http://s7.sears.com/is/image/Sears/00952158000

http://s7.sears.com/is/image/Sears/00952157000

http://s7.sears.com/is/image/Sears/00952152000

http://s7.sears.com/is/image/Sears/00952155000

http://s7.sears.com/is/image/Sears/00952151000

[jsmith2232]

Try switching from a metric to a standard allen wrench some of the sizes are close enough you can pound one in, try gripping it with a vise grips or grind a slot in it and use a flat head screw driver.

[exracer416]

sometimes i use a torx/star head they usually do the trick for me