690 Raptor Part Out Stock & Aftermarket

[200xer]

4-13-07 UPDATED

THESE ARE ALL THE PARTS THAT I HAVE LEFT.

BIKE WILL BE COMPLETELY PARTED OUT!!!!!!!!!!!


FRONT AND REAR FENDERS *************SOLD



CHAIN FOR SALE FOR A +2 SWINGER $15

CLUTCH BASKET GOOD FOR PARTS $15

MOTOR MOUNTS $15

SYLINOID $15

UPPER ARMS $35 EACH

CDI BOX $40



FRONT HUBS WITH ROTOS**************$50

BOTH FRONT CALIPERS***********$40

FRONT BRAKE LINES*************$10

FRONT RIMS **************************** $55 SHIPPED

REAR RIMS $60 SHIPPED



STOCK CARBS SET UP FOR SPARKS PIPE
$100 SHIPPED WITH CABLE


FRONT RAPTOR SHOCKS $50 shipped

BLASTER SHOCKS ARE ON IT IN THE PIC $50 SHIPPED WITH QUAD BOSS COVERS

REAR LINKAGE $25 SHIPPED

FRAME WITH BILL OF SALES $300 P/S

KEY PLASTIC $15

COMPLETE WIRE HARNESS ***********SOLD


VOLTAGE REGULATOR**********************$20

BATTERY CABLES*************************$6


FAN**********************************$40


AIR BOX NO LID $15 SHIPPED



TIE RODS************************** $30


TANK *********************************$25 SHIPPED

AXLE **********************************$50 SHIPPED


STOCK REAR HUBS ***********************$40 SHIPPED



BRAKE PEDAL ****************SOLD

MASTER CYLINDER WITHE LINES AND CUP *********SOLD

REAR CALIPER $50 SHIPPED

AFTER MARKET CLUTCH LEVER WITH CABLE ******SOLD

FRONT BRAKE/MASTER CYLINDER $25 SHIPPED


COOLENT TANK *************************$10 SHIPPED

ON OFF SWITCH******************** $25 SHIPPED
NO CHOKE CABLE LEVER ON IT BECUSE OF THE FCR CARBS


EMAIL ME FOR PICS
ARNAZ81@YAHOO.COM

[200xer]

NN

[noreversesucks]

What size are the FCR's?

If I can come up with the $ I might be interested inthm.

[200xer]

Originally posted by noreversesucks
What size are the FCR's?

If I can come up with the $ I might be interested inthm.



35MM

[noreversesucks]

Does he have the intake to go with the carbs?

Where ya located? Interested in trading what's left for a 87 V8 S-10 maybe? I'm in the northeast corner of Missouri.

[200xer]

HE STILL HAS THE CARB.
I DONT THINK HE WANT TO TRADE FOR THE S-10.
HE'S TRING TO PART OUT OR SELL WHOLE.
TO HELP OUT ON A YZF 450.

HE ALSO HAS A MINT
2000 WR 400 WITH AFTERMARKET EVERY THING. $1800


BUT ALSO IF SOME HAD $1500 HE WOULD TAKE THAT FOR THE RAPTOR ROLLER.
CARBS
SWINGER
EVERTHING MINUS THE MOTOR AND PIPE.

HE LOCATED IN MONTGOMERY ALABAMA.

[hondaexryda]

What year is the frame, and do you have a subframe..

[200xer]

its my bud
his the 1 st owner of it.
i think its an 02 maybe a 01
has title also
bike is still whole minus the motor

[200xer]

Originally posted by hondaexryda
What year is the frame, and do you have a subframe..

[RaptorRacer45]

Still have the Oil Tank??

[200xer]

yes

[200xer]

3265

[200xer]

BE SURE THAT IF YOU USE PAY PAL YOU PAY THE FEE

[Coogs04]

Interested in plastics email sent. Would like pics and condition of the plastics? Are the rear tabs in tack?

anekolea@yahoo.com

[200xer]

PICS SENT

[Prettyboy]

desert grab bar, handlebars and headlights....still have them? If so I'll take them.

I'll add 3% for paypal. Just tell me where to send $

[Prettyboy]

....also....what does he want for the thumb throttle?

[200xer]

PM SENT

[aaronqjones]

Hey man. What is a Direct Shifter?

[200xer]

HI ITS JUST A BILLIT ALUMINUM SHIFER THAT GOES DIRECTLY TO THE SHIFTER SHAFT."IMPROVE SHIFTING,LESS BINDING OF THE GEARS,NO SHIFTER LINKAGE.
LOOK ON PAGE ONE ITS THE SHIFTER THAT SITTING ON THE TIRE.

[pimpin ant easy]

hey...i am interested in a hand full of parts, call me 941 421 2660...i need bars, steering stem..ect...also any one looking to buy 01 raptor, needs some work,,fmf headed and glass pack...nice ,let me know

[Racerdad63]

Hey Man,
I will pay pal you $175.00 shipped for all these products:
Billet Shifter
Grab Bar
Radiator
Steering Stem
Tie Rods
Key Switch.

Let me know ASAP. Rebuilding my Raptor Flat tracker.

[200xer]

grab bar sold

[Prettyboy]

Originally posted by 200xer
grab bar sold

did you get that?

[200xer]

got it
thanks
will be out tommorow
i will pm u the tracking also

[200xer]

0000

[200xer]

2

[200xer]

000

[200xer]

0000

[200xer]

00000

[200xer]

THIS IS THE LAST TIME IT WAS TOGETHER
BEFORE WE TOOK IT DOWN ON SUNDAY

[200xer]

00000

[200xer]

//

[200xer]

//

[ikes05400ex]

do you have the rear shock .do you have a picture

[Prettyboy]

reverse hand control knob....Have it?

[200xer]

Originally posted by ikes05400ex
do you have the rear shock .do you have a picture

[200xer]

MAKE OFFERS ON THIS STUFF.

[kmkm]

how much for the rear shock

[200xer]

$60 SHIPPED

[200xer]

PRICES LOWERED
SOME
GO TO PAGE 1

[Prettyboy]

Originally posted by Prettyboy
reverse hand control knob....Have it?

eyoooh!

[200xer]

Originally posted by Prettyboy
eyoooh!


SORRY I TOOK TOO LONG
I HAVE IT BUT THE MOUNTING PLASTIC WHITH THE 2 SCREWS TO THE FRAME BRACKET ITS CRACKED
BUT THERES NOT A THING WRONG WITH THE KNOB.

$9
PPL SHIPPED
OR $7 MONEY ORDER

[200xer]

Originally posted by Prettyboy
eyoooh!

[200xer]

Originally posted by 200xer

[200xer]

//

[200xer]

//

[200xer]

still for sale

[200xer]

$150 $10 shipped
stock length

ball joints are in good shape
nuts and bolts included

will be shipped by fedex

[200xer]

$2 p/s
has a small crack

[200xer]

//

[200xer]

carb

[200xer]

COME ON PEOPLE!!!!MOVE IT!!!MOVE IT!!!MOVE IT
!!!:D
MAKE OFFERS

[noreversesucks]

Figured out for sure what size the FCR's are?

I've seen where you posted they are 35's and another post where you state they are 39's.

I'm still interested, but I really need to know exactly what they are. (And I'm debaiting whether to buy these carbs or get my shocks rebuilt...:rolleyes: )

[200xer]

Originally posted by noreversesucks
Figured out for sure what size the FCR's are?

I've seen where you posted they are 35's and another post where you state they are 39's.

I'm still interested, but I really need to know exactly what they are. (And I'm debaiting whether to buy these carbs or get my shocks rebuilt...:rolleyes: )

100%
35mm
also the idol ajuster is broke but it look like you can get it out with pilers
thats why the price is lowerd.
the knob only cost about 5 bucks

other than that carbs work great

[noreversesucks]

I'd give ya $350...that's the best I can do right now. LMK

[Prettyboy]

thanks for getting back....but the 2002 I just picked up has the same cracked mount :( on the reverse...guess it's common.

[200xer]

SALE STILL PENDING ON THE CARB
$400 IS THE LOWEST SHIPPED
YOU PAY THE PPL FEES


ALSO THE DANG KNOW ARE KNOW TO CRACK LIKE THAT.
CHECK THE DR.D HANDLE BAR COVERSION KIT.
IT MIGHT BE SOME GOOD

[noreversesucks]

Originally posted by 200xer
SALE STILL PENDING ON THE CARB
$400 IS THE LOWEST SHIPPED
YOU PAY THE PPL FEES


ALSO THE DANG KNOW ARE KNOW TO CRACK LIKE THAT.
CHECK THE DR.D HANDLE BAR COVERSION KIT.
IT MIGHT BE SOME GOOD

Let me know if the deal falls through on the carbs. I can do $400 if I break into my piggybank....:eek2: :D

[warriorman11]

i am VERY VERY interested in the carbs whats the shipping to 44491

[warriorman11]

sorry didnt notice the shipped part till after i put the post

[200xer]

Originally posted by warriorman11
sorry didnt notice the shipped part till after i put the post

FCRS MAY BE SOLD

ALSO HAVE STOCK CARBS THAT WHERE SET UP FOR A SPARKS PIPE
$100 SHIPPED WITH CABLE

[warriorman11]

well if you still have the fcrs let me know

[200xer]

WILL DO

[aaronqjones]

Are the rear wheels bent at all?

[200xer]

Originally posted by aaronqjones
Are the rear wheels bent at all?

RIMS ARE JUST SCUFFED FROM TIRE CHANGER
NOT BENT ANY WHERE.100%

[z400killa]

ygpm on the rear shock

[200xer]

got it

[rippin66]

do u have the seat how much. shifter, left light, rear rotor

[z400killa]

payment sent for the rear shock.

[200xer]

Originally posted by rippin66
do u have the seat how much. shifter, left light, rear rotor

all sold i only have a blaster rotor
$10 shipped

[Blue_Streak23]

still have the axle???...lowered price..???

[200xer]

Originally posted by Blue_Streak23
still have the axle???...lowered price..???
THE RAPTOR PARTS ARE NOT MINE IM SELLING FOR A BUDDY.
HE'S PRETTY FIRM ON $70 SHIPPED
I HAVE A BANSHEE ADJUSTABLE DURABLE WITH HUBS AND LOCKER AND SPACERS $150 SHIPPED

[gotwarrior]

Are the rear wheels stock or aftermarket polished? How much shipped?

[200xer]

Originally posted by gotwarrior
Are the rear wheels stock or aftermarket polished? How much shipped?
stock $50 shipped
i also have a front set of itp off sets $60 shipped

[Caseys 300ex]

HEy is that rear shock still for sale?

[200xer]

Originally posted by Caseys 300ex
HEy is that rear shock still for sale?
SOLD MINE
CALL MY BUD HE HAS 2 FOR SALE
NAMES GLENN
256--874-7577

[Caseys 300ex]

Do you know how much hes selling them for??

[200xer]

Originally posted by Caseys 300ex
Do you know how much hes selling them for??
"$50 OR MAKE OFFER"

[Caseys 300ex]

Sorry for being annoying but i dont want to buy this shock without seeing what it looks like. I dont want to buy a crappy shock. Thanks.

[200xer]

Originally posted by Caseys 300ex
Sorry for being annoying but i dont want to buy this shock without seeing what it looks like. I dont want to buy a crappy shock. Thanks.
CALL HIM OR
GLENNYZRACER25@YAHOO.COM
OR GLENYZRACER25@YAHOO.COM

THIS IS NOT MY SHOCK ITS HIS DEAL.
IM JUST THE MSGER.

[Caseys 300ex]

Well do u think there in good shape? IF so ill buy one.

[SAML]

do u still have those rims for sale and are they in good condition

[200xer]

yes i still have them and they just have a few marks for the tire changer but not dent any where

[SAML]

how much for the rims with shipping included thanks SAML

[bergies729]

how much for the swingarm and bearing carrier? what length?

[Caseys 300ex]

What state does Glen live in?

[200xer]

Originally posted by bergies729
how much for the swingarm and bearing carrier? what length?
I SOLD IT TO GLEN
HE MAY RESELL IT.
IT WAS A PLUS 2

[200xer]

Originally posted by Caseys 300ex
What state does Glen live in?
ATHENS, ALABAMA

[200xer]

Originally posted by SAML
how much for the rims with shipping included thanks SAML

ONLY HAVE THE REARS NOW $50 SHIPPED

[corey0817]

still have the frame?

[200xer]

yes

[Robin Hood]

Looking into buying the sprocket hub and/or the brake hub and rotor, do you still have?

[Robin Hood]

Looking into buying the sprocket hub and/or the brake hub and rotor, do you still have?

[Robin Hood]

Looking into buying the sprocket hub and/or the brake hub and rotor, do you still have?

[200xer]

sprocket hub

brake hub

i may have a banshee rotor.

make offer

[200xer]

TITLE

[200xer]

still got it

[charles ford]

I just got a 01 raptor 660 and need the front and rear fenders,the big plug in the flywheel side cover,seat or cover,reverse knob, sprocket cover,let me know if you have the parts and how much you want for them.?? 440-864-0743 charliekat@oh.rr.com
Chas

[200xer]

PARTS STILL ARE FOR SALE

[noreversesucks]

What's the low dollar on the frame shipped to zip 63445?

Are there any liens on the title?

[charles ford]

I need front fender and rear fender,seat,sprocket cover.??
let me know what you have and a price.??
Chas

[bigdman69oh]

rims and tires or just rims send me an email bigdman69oh@yahoo.com

[200xer]

Originally posted by noreversesucks
What's the low dollar on the frame shipped to zip 63445?

Are there any liens on the title?

sorry frame sold

[bigdman69oh]

if so what size and shape

[bigdman69oh]

how much shipped new straitsville oh 43766

[200xer]

Originally posted by bigdman69oh
if so what size and shape
i have a set of yfz front stock tires on itp off set rims $110 shipped
tires have 99% tread.
great shape.

[bigdman69oh]

do you still have rear brake caliper how much shipped to 43766
please let me know

[200xer]

Originally posted by bigdman69oh
do you still have rear brake caliper how much shipped to 43766
please let me know
sorry i dont have one.

[yamitude]

Still got the axle?

[elgatoblanco9]

do you have a rear shock? or has it been sold?

[200xer]

Originally posted by yamitude
Still got the axle?
all i have left is 1 banshee axle $35 shipped
it has a slight tweek in.

[200xer]

Originally posted by elgatoblanco9
do you have a rear shock? or has it been sold?

sorry its sold
all i have is a polaris preditor 500 rear shock

[elgatoblanco9]

thanks man, I think that the polaris rear is two long for what I need it 4. Thanks though