250R, 400EX, 300EX, 250X Parts

[Lonestar_R]

You name I have it, I have a little of everything I need to get rid of....all prices are shipped and I will make package deals....

[Lonestar_R]

250R Rear Suspension Custom Wishbone, Needle Bearings instead of bushings and super strong....comes as pictured......SOLD

[Lonestar_R]

250R Rear Master Cylinder, Brand New Honda Part...only out of the box for pics, SOLD

[Lonestar_R]

250R Brand New CDI....all new Honda Parts...never out of the package.....SOLD

[Lonestar_R]

250R Front Master Cylinder & Front Brake Calipers...all in working order........ SOLD

[Lonestar_R]

and the calipers....SOLD

[Lonestar_R]

250R brand New White Brothers Air Box Rings....SOLD

[Lonestar_R]

250R Swingarm Pivot Bolt...Brand New Honda Part....$25 shipped

[Lonestar_R]

400EX Front Hubs...Brand New Honda.......$50 Shipped

[Lonestar_R]

Brand New Maier 300EX/400EX Handguards.....I believe I have all the mounting hardware....I tried to get these to fit on my 450 so they are trimmed a little........SOLD

[Lonestar_R]

300EX/400EX Maier Handguards, Used, but in good shape...I think I have the hardware for these also....SOLD

[Lonestar_R]

250X Cylinder.....I don't know what bore this is on.....so I am asking $25 shipped

[Lonestar_R]

another of the 250 Cylinder

[Lonestar_R]

300EX Cylinder with stock Piston......looks like it will need at least honed and reringed......very nice shape.......$60 shipped

[Lonestar_R]

another of the 300 Cylinder

[Lonestar_R]

250X/300EX Hetrick Full Exhaust.....a little rough around the edges but not dents in the can or the head pipe.......$125 Shipped
SOLD

[Lonestar_R]

another of the exhaust

[Lonestar_R]

250R Antivibe Stem With Lonestar 7/8's Clamp.....straight and stock height......SOLD

[kustomfab2003]

Do you have a rear shock for a no link setup (250r)?

[Lonestar_R]

No sorry I don't......this is all I have left besides my Lonestar Frame

[danhung11]

After looking at the pics....

I would trade the front calipers, hubs, cap and coil....for the tires - the tires are in great shape as you can see from my pics...

Let me know what you think....

:D

[Lonestar_R]

MAKE SOME OFFERS......Willing to work trades also.....I also have some other parts....I will list them if you want pics I will post them or send them to ya.....


250X Rocker Box with good rockers (can be used on a 300EX just plug the decompression mechanism).......$65 Shipped

250X / 300EX Rear SRP Wave Brake Rotor.....SOLD

Front Steel Wheels with Pure Sports Bandits....needs painted....+1+4 offset...Honda Bolt Pattern......$35 plus shipping

Rear Gold Honda ATC Factory Wheels with Carlise Bandlands tires...Painted Black, but chipping bad.....$35 plus shipping

I also have a set of rough front and rear 250EX Shocks and a set of 250EX front Hubs with bearings......send me some offers on this stuff

[womerk28]

got any 300ex plastic

[Lonestar_R]

no sorry no 300EX plastics....

[Eddiesanders250]

Do you have a pipe or just a silencer for the R?

[Lonestar_R]

No pipe or silencer for an R........what I have for a 250R is what I have listed....Except for a Lonestar Baja 250R Frame....that is the only other thing I have for a 250R

[Lonestar_R]

Make offers this stuff must go

[Dan229]

I will give you $75 for the 300ex exhaust shipped to 30144? Send me a PM if interested.

[2StrokeGod]

ill give you $100.00 for 300ex pipe shipped to 85629

[Lonestar_R]

I have a sale Pending on the pipe 2 stroke God.....if It falls through I'll let you know

[stic]

hey man...loki from fta.would you have any decent bars?

[Lonestar_R]

No sorry, No bars dude

[lost boyz]

do you have the rear caliper for a 2000 400ex

and also do you have tie rod bar...??????????

[Lonestar_R]

No 400EX caliper or tie rods sorry

[stic]

you still have the red handguards?

[Lonestar_R]

Yeah I still have the handguards......I will look to see what all I have as far as the hardware.....if I don't have it all, maier can surely hook you up

[stic]

do ya think they'd fit an 05 honda rancher?
see what ya got as far as hardware goes and lemme know.
dethstic@hotmail.com

[Lonestar_R]

I have no idea maybe maybe not.......if I could look at it I could maybe tell you.......you might have to modify them to get them to work.....

[stic]

well..if ya have the mounting h/w ill prob take 'em.if they dont work on his,ill have a spare set

i need a 250x Wireing harness

and a 250x-300ex Head with good valves and seals

[Lonestar_R]

Kickstarts, I don't have either sorry

Originally posted by Lonestar_R
Kickstarts, I don't have either sorry

:(

[orangeEX]

Front Steel Wheels with Pure Sports Bandits....needs painted....+1+4 offset...Honda Bolt Pattern......$35 plus shipping

Rear Gold Honda ATC Factory Wheels with Carlise Bandlands tires...Painted Black, but chipping bad.....$35 plus shipping


any pics??
i probly want them

[firefighterjosh]

Do you have any stock 400ex pegs and or heel guards?

[Lonestar_R]

firefighterjosh, No I don't......I do now have a almost complete CRF450R Bike that I'm parting out.....I'm keeping the Motor, Carb and Electronics. I'm building a Hybrid.....the wheels are gone...but I have everything else.....I will sell cheap cause I don't need or want any of it

[Hondarluvr]

Hey would you do the stem for a $100 shipped if so do you have a paypal adress to send it to? send me a pm if interested

[Lonestar_R]

I will do 115 shipped and please add for paypal fees....pm me if you want it I will give you my paypal info

[Hondarluvr]

sold sent you a pm

[orangeEX]

do you still have the swinger bolt

[Lonestar_R]

yep I still have the swinger bolt....I'm guessing you don't want the wheels and tires......

[orangeEX]

i did or still do actually but i ran into a little money situation after talking to you about them so i figured there was no sence in wasting any more of your time. lol
i'll e-mail you!

[Lonestar_R]

if you want I can sell you the wheels only...the tires aren't much count and save you some money on shipping......let me know....I still have them

[hks308]

i need a rear brake caliper for a honda 2001 300ex. if you got one or can get one for me let me know!

thanks

[Lonestar_R]

No I don't have a 300EX Brake Caliper....Sorry

[womerk28]

what about 95 shipped

[Lonestar_R]

Exhaust is sold sorry

[demicco1104]

Im interested in alot of your parts. the lonestar frame and teh prodject bike especially. If you could calle me that would be great 201 661 0194 Or email me at andy@rubberupracing.com Thanks again and please get back to me andy

[demicco1104]

i want the frame. If you still ahve it consider it sold. WHats the link set up? 201 661 0194

andy

[Lonestar_R]

Sent you a pm demicco1104

[F-15man]

do you have a port and polished cylinder head for a 400ex?

[Lonestar_R]

No sorry no cylinder head for the 400EX

[datdaz84]

Complete plastic for an 03 400EX? I just bought one that had been rolled a few times and the plastic is trashed. Let me know what color.

Thanks!

Originally posted by datdaz84
Complete plastic for an 03 400EX? I just bought one that had been rolled a few times and the plastic is trashed. Let me know what color.

Thanks!

i'll cover this one for ya...he don't have any plastic for a 400ex...

and firefighter josh, he don't have either pegs or guards, but i have both...i think, i know i have the pegs...pretty sure i still have the heel guards...if i do have the guards, they came off as soon as the bike come home...i'll go dig through my pile parts in the garage

[Aarons 01 400EX]

400 ex motor?

[Lonestar_R]

Nope sorry no motor...only what I have in this post and most if not all of it is sold......

Moderator please delete this post

[checkie]

Hi,

Do you have a good transmission of a model 2000?
How much do you ask for it?
Pics?

Cheers

[Lonestar_R]

I ONLY HAVE WHAT IS IN THIS POST NOTHING ELSE...........

[trxenergy65]

what after market parts do you have for a 300ex

Originally posted by trxenergy65
what after market parts do you have for a 300ex

can ya read the post above ya...and then look

[charles ford]

I'm building a TRX650L right now. I have a 01 400ex w/extra frame and I'm putting a NX-650 in it's the same as a XR-650L motor. I've cut my motor mounts and I'm trying to get the rear end lined up. my swing arm bolt is stuck in the 400s frame so I will be needing a new one before I can go on as I'll have to cut it out. I bought a front head pipe from a xr650l and it looks stock the motor is sitting in the frame and looks very nice. I plan on selling the extras when I'm done. I'm very close to having my TRX650L KONG will live soon.!! I would love to put this on my quad but I don't want them to know what it is.let me know if you can help. I need a 400ex swing arm bolt and rear rotor and NX-650 wiring parts.?? if I knew how to do it. Thanks Chas

[MX300ex]

do u have

300ex swinger, carrier or motor?

[Lonestar_R]

I might have a swingarm and stock carrier......I will let you know in a few days