sparky76
09-05-2006, 05:42 PM
I just put in a hotcams stage 2 cam and I need some help. My 05 only has an HRC lid, unifilter, LRD Pro4 slip on and is jetted spot on. Ever since the cam was installed and valves set, it starts and idles like crap.
What was a one kick bike now takes 3 to 4 kicks to pop and won't idle for longer than 10 to 20 seconds without dying. I can't remember my jet sizes but I will look, but the air screw is at 2 turns out, and going in or out a half turn doesn't make enough difference to keep it idling or starting descent. I have a XC race this sat. and it looks grim at the start already-thanks.
any suggestions for jetting would be appreciated-st. louis elevation
What was a one kick bike now takes 3 to 4 kicks to pop and won't idle for longer than 10 to 20 seconds without dying. I can't remember my jet sizes but I will look, but the air screw is at 2 turns out, and going in or out a half turn doesn't make enough difference to keep it idling or starting descent. I have a XC race this sat. and it looks grim at the start already-thanks.
any suggestions for jetting would be appreciated-st. louis elevation