View Full Version : How can I tell?
00Red400EX
08-29-2002, 11:21 AM
How can I tell what size main jet is in my carb? Is the number on the needlle or what? What is the stock size? I bought my quad and it already had a slip on exhaust but I dont know if the guy put a new jet in it or not? Thanks for an help!
--Josh
AtvMxRider
08-29-2002, 11:30 AM
The number is stamped on the main jet. you have to pull the float bowl off to check it.
00Red400EX
08-29-2002, 11:32 AM
Thanks a bunch!! Does anyone know what the stock size jet is? Thanks!!
--Josh
timewass
09-09-2002, 08:34 AM
Stock is 148 and you DO NOT have to take the float bowl off to change a jet. There is a 17mm bolt in the bottom of the bowl. Just take that off then use a deep well 6mm (6 point) socket and take the jet out. I can post a pic if you need one.
00Red400EX
09-09-2002, 11:40 AM
Thanks for all the replies. No I dont need a picture I can figure it out. Thanks bro!!
--Josh
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.