Need help Badly

[striker1001]

Ok guys so heres the deal. I poped a wheelie and when i landed somehow my chain just decided to pop out of the back sprocket. But no it gets worse. When the chain poped out, my chain kinked up between the front sprocket and the chain slide and it wedged itself in there reallll TIGHT. We tried to remove the front sprocket but the chain is in there so tight, the sprocket wont come out. Im runing out of idea guys. Please Help!!!!!!:confused:

[bubba's400ex]

i can't really picture it but mabe you can cut the sprocket or chain off with a dremel or something.
hope this helps

[outlaw450r]

If the chain is still together try to pry backwards off of the axle with a screwdriver through the chain. Had to do that just the other day on my buddies 250R.

[striker1001]

Ill get a pic soon. Either tonite or tomorow.

[krt400ex]

Originally posted by bubba's400ex
i can't really picture it but mabe you can cut the sprocket or chain off with a dremel or something.
hope this helps

that is what i was thinking....but i am not sure

[hondamanex400]

i had that happen to mine about 4 years ago. I had to take the front sproket off in-order to loosen the chain. Mine jammed between the spocket and the chain slide/motor case, and between the sprocket and the swingarm. i wound up cutting the chain w/ a wiz-wheel, loosened the front sprocket, and beat the chain out w/ a hammer and punch. I hope this helps, and good luck

[krt400ex]

Originally posted by hondamanex400
i had that happen to mine about 4 years ago. I had to take the front sproket off in-order to loosen the chain. Mine jammed between the spocket and the chain slide/motor case, and between the sprocket and the swingarm. i wound up cutting the chain w/ a wiz-wheel, loosened the front sprocket, and beat the chain out w/ a hammer and punch. I hope this helps, and good luck


ha said that he tryied to take the front sprocket off, but it was jammed on

[underpowered]

put the chain on the top part of the rear sprocket and try rolling the quad backwards to pull it out. that has usually worked for me.

[skyhighatv]

take a 2x4 and put it on the chain right behind the swing arm whert it bunched up and hit the 2x4 with a baby sledge-force got it in there its the only way to get it out.

[rYan01400EX]

Use a sprocket puller on the front.. It happened to me once too.

[ramoncito paez]

Originally posted by underpowered
put the chain on the top part of the rear sprocket and try rolling the quad backwards to pull it out. that has usually worked for me.
the way i picture it this is the way i'll go, but if its to hard get another quad & tow it backwards