View Full Version : rebuild done now I need help
wysse
09-01-2006, 06:07 PM
seems to run grate its not jeted right yet but some times when I pull the clutch in when I am riding it the rmps dont drop down what dose this sound like??also some times at idle it will rev a little on its own!
02440exkid
09-01-2006, 06:24 PM
that's something to do with the carb maybe your throttle cable is bound up some where
wysse
09-01-2006, 06:29 PM
mabe a leak in the carb?? if its idleing And i give it gas it will hold the rpms up for a min befor it falls back down
hondaredrider
09-01-2006, 11:00 PM
double check your throttle cable, if in doubt buy a new one. they cost about 10 bucks or so. oh and go with Motion Pro cables.
WhtPrd09
09-03-2006, 08:26 PM
put in ur throtal screw a lil bit...pull ur quick adjust on ur purch...had that same problem with my old 3 wheeler.
GPracer2500
09-03-2006, 08:35 PM
Hanging and/or erratic idles are a tell-tale sign of a lean pilot circuit. Check for air leaks and make sure the pilot jet and fuel screw are correct.
krt400ex
09-04-2006, 01:37 PM
Originally posted by GPracer2500
Hanging and/or erratic idles are a tell-tale sign of a lean pilot circuit. Check for air leaks and make sure the pilot jet and fuel screw are correct.
x2, u pulled the words out of my mouth
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.