PDA

View Full Version : 400ex parts...Need to go.



Bigg Pimpin
09-01-2006, 10:05 AM
Still have a few things left from the partout. Here's what I have. All prices are OBO and do not include shipping unless otherwise noted.


Here's the stuff I have on ebay now. The top end of the motor will hit ebay Sunday unless someone speaks up on here.
http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZhollywood416

Dyna programmable Ignition System- On Ebay $175 BIN only has 3 rides on it SOLD

Stock gas tank w/ cap- $20

Stock red tank cover- $5 SOLD

K&N Filter and Prefilter- $25 Prefilter has some rub holes but filter itself is in good shape.

Stock heal gaurds w/ Brackets- $20

Frame w/ ATP racing gusset kit, Mirror Black powdercoated AC Racing ProPeg Nerfs w/ Clean Florida title Painted Subframe will be included but has the battery&tool box tabs cut off since I went with the alum. airbox that holds the battery. $350

I do still have the motor but it is in pieces due to a buyer that backed out. I will sell it seperately or you can buy the whole thing and put it back together yourself. Only been into this time. It was all stock when I had it built 5/05


JE 11:1 87mm piston and cylinder, studs good, cylinder clean, rings good. $150SOLD


Complete cylinder head race ported by ATP racing engines. Had new valves, guides, seals etc. done at the same time as the build. $300 porting was almost that much aloneSOLD


TC Racing MX cam $75

Rocker box $65 Has a very slight hairline partway across the upper mount. Has been that way since I had it and never got any worse.

Complete Bottom end with crank, trans., clutch, HD cam chain etc. Shifts smooth great shape. $350 Only issue with it is the steels need to be pulled out of the clutch and roughed up as they are glazed over and slip just a little under WOT.

Starter $50

Oil tank/cooler and lines- $75



Some of the pics can be found on my other thread here



http://www.exriders.com/vbb/showthread.php?s=&threadid=243328&perpage=15&pagenumber=1

If you need pics of something that's not there just give me your email and I'll send them to you.

BossmanEX
09-01-2006, 09:01 PM
can you give a little more info on the cam? I have a stage II hot cam in mine but its soo noisy I dont like it. How does this one compare? Thanks.

Bigg Pimpin
09-02-2006, 06:32 AM
Not sure what you mean by noisy :confused: but the TC MX cam is a more agressive cam set up for mid-top end. Pulls really hard from about 6k rpm up to around 11k before it starts to fade. Just need a good rev box to compliment it IMHO.

Chin_Chilla
09-02-2006, 08:21 AM
how much for the HD cam chain?

Bigg Pimpin
09-02-2006, 02:59 PM
Originally posted by Chin_Chilla
how much for the HD cam chain?

Sorry it is staying with the bottom end due to the fact I don't have the tools to get it out. :p You can get one from your dealer for about $35.

psycafunkapus
09-03-2006, 07:30 AM
hey im interestend in the piston and cylinder i was wondering if i could get some pics

dodgeboys72@hotmail.com

SoUpX
09-03-2006, 12:31 PM
i need a rear brake master cylinder, or the whole rear brake assembly.. $$??

300ex03_619
09-03-2006, 02:27 PM
still have the carb? how much?

Bigg Pimpin
09-03-2006, 06:14 PM
300ex03_619 - Yea I have it. has choke delete and jetting for 416. $75

SoUpx- Sorry already sold it.

psycafunkapus- Will send you an email shortly.

300ex03_619
09-03-2006, 06:23 PM
do u still have stock jetting and choke to put back in it? i hav a 300ex and dont need it to be that rich

Bigg Pimpin
09-03-2006, 06:25 PM
Nope don't have either. The choke is useless IMHO and not sure even the stock 400 jetting would be correct for your 300.

300ex03_619
09-03-2006, 06:26 PM
is there any way u could come to $50?

Bigg Pimpin
09-03-2006, 06:41 PM
Yea I'd probably do $50 plus shipping :cool:

300ex03_619
09-03-2006, 06:43 PM
i am located in baner elk NC, figure up shipping and payment method, i will take it

Bigg Pimpin
09-04-2006, 07:07 AM
$56 priority shipped, Paypal is fine bigg_pimpin22@hotmail.com just make sure to include what you are paying for so I don't get it mixed up with any of my ebay stuff.

cchrider
09-04-2006, 02:17 PM
You have the stock start/killswitch button??
pm if you do
thanks
cchrider

Bigg Pimpin
09-04-2006, 04:01 PM
Sorry don't have it. Pretty much what I listed is all I have.

rYan01400EX
09-04-2006, 11:08 PM
I am interested in the top end if the other person doesn't take it. Thank you.

Bigg Pimpin
09-05-2006, 09:03 AM
What parts are you interested in. Only interest I have right now is piston, carb and cylinder everything else is still available.


Originally posted by rYan01400EX
I am interested in the top end if the other person doesn't take it. Thank you.

Bigg Pimpin
09-06-2006, 11:27 AM
:)

CrazyWhiteBo
09-06-2006, 01:12 PM
how much for the cylinder head?

Bigg Pimpin
09-06-2006, 06:09 PM
$300 shipped all the guts were replaced or refreshed when I had the motor built.


Originally posted by CrazyWhiteBo
how much for the cylinder head?

CrazyWhiteBo
09-07-2006, 05:10 AM
check pm's

Bigg Pimpin
09-08-2006, 07:35 AM
List has been updated

Bigg Pimpin
09-09-2006, 02:08 PM
ttt

flattracker4389
09-12-2006, 02:41 PM
i am interested in the tc cam. would this cam require heavy duty chain and rockers?

Bigg Pimpin
09-12-2006, 02:52 PM
I had the HD chain in mine but only stock rockers and it did just fine for over a year. I think TC does reccomend the hardened rockers but they are obviously not neccesary. :cool:

flattracker4389
09-14-2006, 12:20 AM
how much for the cam shipped to 70785 (walker, La)?

Bigg Pimpin
09-14-2006, 10:08 AM
$85 shipped priority mail.

jal232
09-14-2006, 10:32 AM
Still got it..PM me a price if you do..Thanks
Josh