PDA

View Full Version : Will a '05 yfz axel fit on a '06 or '07?


Narly R
08-30-2006, 01:40 PM
Anyone know? Thanks
Fastyfz
08-30-2006, 07:11 PM
no they will not fit the carrier and swing arm are a different design bearings are a different size as well
daddio
08-30-2006, 09:29 PM
I put an '04 lonestar and RPM axle in an '06 rear end just fine. The bearing O.D. is bigger, but the I.D. is the same. The sprocket hub and brake hub are the same spline. And the spacing is the same. I'm looking at the two stock axles and the only difference is the color.
intruder
08-31-2006, 03:50 AM
Originally posted by daddio
I put an '04 lonestar and RPM axle in an '06 rear end just fine. The bearing O.D. is bigger, but the I.D. is the same. The sprocket hub and brake hub are the same spline. And the spacing is the same. I'm looking at the two stock axles and the only difference is the color.

And the nut on the ends is bigger on the 06 they will work.
daddio
08-31-2006, 06:39 AM
Originally posted by intruder
And the nut on the ends is bigger on the 06 they will work.

You're correct. I missed that one. I was just lookung at all the features in the center area, where it gous into the carrier. :uhoh:
Narly R
09-07-2006, 10:22 PM
Okay, so I will go with a yes. Thanks guys.