Won't strart.

[300ex_#387]

At the races this past weekend I had a wreck on a jump after the holeshot and flipped the 4 wheeler upside down. I got up and turned it over and tried to start it, but the nuetral light wouldn't even come on. My tether was in, it was in nuetral, but it wouldnt start. I was wondering if when it flipped it hit something and knocked somethign loose? Any Ideas what happened? By the way this is a 300ex.

[Warrioreater400ex]

well the neutral light could be the wire, i know tons of 400ex get ripped out where they plug into the case under the sprocket/shifter, as far as not starting, a lot of times after a flip it will take a while to start due to the floats/fuel being all messed up, i dont really know what exactly happens but if you have tried since then and it STILL wont start, i would take the carb apart and make sure the floats arent stuck..

[400eXr1d3rZ]

Check the battery, make sure all wires are connected.

[300ex_#387]

Battery Terminals are on. As far as it being flooded the starter wont even turn on. Something had to have came loose, and I cant find it. Give me a checklist of things to try.

[400eXr1d3rZ]

Check all grounds, I dont know what could be the problem. Could the battery just be dead?

[300ex_#387]

Battery is brand new. It started fine on the line then after we flipped the 4 wheeler back over the nuetral light stopped working, and nothign electrical is working.

[Aceman]

Get a schematic and start checking the wiring. Test at the starter and work backwards. Check all your grounds, clean them, and tighten them back down. Check your fuse.

[300ex_#387]

Originally posted by Aceman
Get a schematic and start checking the wiring. Test at the starter and work backwards. Check all your grounds, clean them, and tighten them back down. Check your fuse.

It was the fuse. Thanks guys.